EPSON Perfection 610
6. Remove the two screws (gold, CBS, M3x4) securing the shield
plate, and then remove it toward the inside.
7. Disconnect the cable from the locking connector (push and release),
remove the five screws (gold, CBS, M3x4), and then remove the
Power Supply Board from the shield plate.
CBS Screws (M3x4)
Figure 4-32. Power Supply Board Removal (1)
CBS Screws (M3x4)
Figure 4-33. Power Supply Board Removal (2)
Assembly and Disassembly
Shield Plate
CBS Screws (M3x4)
Connector
Disassembly Procedures
Figure 4-34. Power Supply Board
Revision B
42