Epson WorkForce 610 Series Quick Start Manual
Epson workforce multifunction printer quick start guide
Hide thumbs
Also See for WorkForce 610 Series:
- Quick manual (60 pages) ,
- Service manual (52 pages) ,
- Specifications (2 pages)
Advertisement
Start Here
1
Unpack
(Included for
Canada only)
If anything is missing, contact Epson as described on the back under
"Any questions?".
Note:
The model name of your product may vary slightly from the one shown above.
The included CD and documentation apply to all products in the series.
Caution:
Do not open ink cartridge packages until you are ready to install the ink.
Cartridges are vacuum packed to maintain reliability.
Canada only: For French speakers, remove stickers from the backing sheet and place
over corresponding text on the control panel.
Remove all protective materials.
2
Turn on and adjust
1
Connect the power cable.
Caution:
2
Lift the control panel to raise it, then press the
Note:
To lower the control panel, squeeze the release lever underneath and push the
control panel down. For more information on using and adjusting the control panel,
see your Quick Guide.
Do not connect to your computer yet.
Series
Phone cord
On
Power cord
On button.
Advertisement
Table of Contents
Related Manuals for Epson WorkForce 610 Series
Summary of Contents for Epson WorkForce 610 Series
- Page 1 Start Here Unpack (Included for Canada only) If anything is missing, contact Epson as described on the back under “Any questions?”. Note: The model name of your product may vary slightly from the one shown above. The included CD and documentation apply to all products in the series.
-
Page 2: Make Settings
Make settings Select your language. Press to select the desired option. Press OK when done. Select your country/region, then press OK. For the Daylight Saving Time setting, select Summer if your region uses Daylight Saving Time and it’s currently in effect. (DST is effective from spring through summer.) Otherwise, select Winter to turn off the setting. -
Page 3: Install Ink Cartridges
Install ink cartridges Note: Don’t load paper before installing the ink cartridges. Lift up the scanner. Open the cartridge cover. Shake the ink cartridges gently 4 or 5 times, then unpack them. Remove only the yellow tape from each cartridge. Caution: Don’t remove any other seals or the cartridges may leak. -
Page 4: Load Paper
Load paper Open the paper support and pull up the extensions. Extend the output tray and raise the stopper. Note: If you are using legal-size paper, do not raise the stopper. Hold the feeder guard forward, then squeeze the edge guide and slide it to the left. -
Page 5: Connect The Phone Cord
Cancel screen, click USB cable. You can’t install your software that way. Insert the WorkForce 610 Series software CD. With Windows Vista window, click Run SETUP.EXE. When you see the User Account Control screen, click Continue. Click Install and follow the on-screen instructions. - Page 6 Epson Information Center. ® Macintosh Make sure the product is NOT CONNECTED to your computer. Insert the WorkForce 610 Series software CD. Double-click the Click Install and follow the on-screen instructions. When you see this screen, select Install driver for direct USB connection and then click Next.
-
Page 7: Any Questions
Internet Support Visit Epson’s support website at epson.com/support and select your product for solutions to common problems. You can download drivers and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions. Speak to a Support Representative Call (562) 276-4382 (U.S.) or (905) 709-3839 (Canada), 6 Time, Monday through Friday. -
Page 8: Need Paper And Ink
Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks. This information is subject to change without notice.