Using The Operation Buttons; Selecting The Input Signal Source; Adjusting The Volume; Muting The Sound - Sharp XG-P25X Operation Manual

Using the Operation Buttons

Selecting the Input Signal Source

Projector

Adjusting the Volume

Projector

Muting the Sound

Projector
E-31
Remote control
INPUT
Remote control
VOLUME
Remote control
MUTE
Press INPUT 1.2.3 or INPUT 4.5 on the projector or
INPUT (1, 2, 3, 4 or 5) on the remote control to change
the mode.
• When no signal is received, "NO SIGNAL" will be displayed.
When a signal that the projector is not preset to receive is
received, "NOT REG." will be displayed.
On-screen Display
INPUT 1 Mode INPUT 2 Mode
INPUT 4 Mode INPUT 5 Mode
Press VOLUME / to adjust the volume.
On-screen Display
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
On-screen Display
INPUT 3 Mode