Adjusting The Picture Aspect Ratio - Sharp XG-P25X Operation Manual

Adjusting the Picture Aspect Ratio

Projector
COMPUTER
4:3 aspect ratio
Other aspect ratios
• "NORMAL" is fixed when XGA (1024
Input Signal
Resolution lower
than XGA
XGA
Resolution higher
than XGA
SXGA
(1280 1024)
E-35
Remote control
UNDO
RESIZE
NORMAL
SVGA (800 600) 1024
XGA (1024 768) 1024
SXGA (1280 960) 1024
UXGA (1600 1200) 1024
SXGA (1280 1024) 960
768) signals are entered.
NORMAL
Projects a full screen image
while maintaining the
aspect ratio.
4:3 aspect ratio
4:3 aspect ratio
4:3 aspect ratio
This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, FULL, DOT BY DOT, BORDER, STRETCH or
SMART STRETCH image.
1
Press RESIZE. Each time RESIZE is pressed, the
picture mode changes as shown below.
2
To return to the standard image, press UNDO while
"RESIZE" is displayed on the screen.
FULL
768 –
768 –
768 –
768 –
768 1024 768
Output screen image
FULL
Projects a full screen image
while ignoring the
aspect ratio.
DOT BY DOT
800 600
–
1280 960
1600 1200
1280 1024
DOT BY DOT
Projects the original
resolution signal of the image.