Using The Operation Buttons; Selecting The Input Signal Source; Adjusting The Picture Aspect Ratio - Sharp XV-Z90U Operation Manual

Using the Operation Buttons

Selecting the Input Signal Source

Adjusting the Picture Aspect Ratio

Press INPUT on the projector, INPUT 1, INPUT 2, INPUT
3, INPUT 4 or DIGITAL INPUT on the remote control to
select the desired input mode.
• When no signal is received, "NO SIGNAL" will be displayed.
When a signal that the projector is not preset to receive is
received, "NOT REG." will be displayed.
INPUT 1 Mode
INPUT button
This function allows you to modify or customize the
picture display mode to enhance the input image.
Depending on the input signal, you can choose
NORMAL, BORDER or STRETCH image.
1 Press RESIZE. Each time RESIZE is pressed, the
1
On-screen Display
INPUT 2 Mode
DIGITAL Mode
INPUT 4 Mode
picture mode changes as shown on the next page.
INPUT 3 Mode
E-24