Using the Operation Buttons
Selecting the Input Signal Source
Projector
Adjusting the Volume
Projector
Muting the Sound
Projector
31
Remote Control
INPUT
buttons
1.2.3
4.5.6
Remote Control
VOLUME
buttons
1.2.3
4.5.6
Conference Series
Remote Control
MUTE
button
1.2.3
4.5.6
Conference Series
Press INPUT 1.2.3 or INPUT 4.5.6 again to change the
mode.
• When no signal is received, "NO SIGNAL" will be displayed.
When a signal that the projector is not preset to receive is
received, "NOT REG." will be displayed.
On-screen Display
INPUT 1 Mode
INPUT 2 Mode
INPUT 4 Mode
INPUT 5 Mode
Press VOLUME
/
to adjust the volume.
On-screen Display
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
On-screen Display
INPUT 3 Mode
INPUT 6 Mode