Using the Operation Buttons
Selecting the Input Signal Source
Projector
Adjusting the Volume
Projector
Muting the Sound
Projector
E-31
XG-P25X/CD (E)-c
31
Remote control
INPUT
Remote control
VOLUME
Remote control
MUTE
Press INPUT 1.2.3 or INPUT 4.5 on the projector or
INPUT (1, 2, 3, 4 or 5) on the remote control to change
the mode.
• When no signal is received, "NO SIGNAL" will be displayed.
When a signal that the projector is not preset to receive is
received, "NOT REG." will be displayed.
On-screen Display
INPUT 1 Mode
INPUT 2 Mode
INPUT 4 Mode
INPUT 5 Mode
Press VOLUME
/
to adjust the volume.
On-screen Display
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
On-screen Display
02.3.19, 7:06 PM
INPUT 3 Mode