Using The Operation Buttons; Selecting The Input Signal Source; Adjusting The Volume; Muting The Sound - Sharp XG-P20XE Operation Manual

Using the Operation Buttons

Selecting the Input Signal Source

Projector

Adjusting the Volume

Projector

Muting the Sound

Projector
39
GyroRemote
INPUT
GyroRemote
VOLUME
MUTE
Press INPUT again to change the mode.
You can use these tools by accessing the "Button Assign"
list on your GyroRemote. Choose popup list "5/5". (See
page .)
33
• When no signal is received, "NO SIGNAL" will be displayed.
When a signal that the projector is not preset to receive is
received, "NOT REG." will be displayed.
On-screen Display
INPUT 1 Mode INPUT 2 Mode
INPUT 4 Mode INPUT 5 Mode
Press VOLUME / to adjust the volume.
On-screen Display
Press MUTE to temporarily turn off the sound.
Press MUTE again to turn the sound back on.
You can use this tool by accessing the "Button Assign"
list on your GyroRemote. Choose popup list "2/5" and
press Function (3). (See page
On-screen Display
INPUT 3 Mode
.)
33