Auto Clear - Sharp AM-400 Online Manual

Auto clear

After a fax or copy job is completed, the machine will automatically return all
temporary copy settings or all temporary fax settings to the default settings if
60 seconds elapses without any keys being pressed on the operation panel. If
desired, you can change the amount of time that must elapse to 30 seconds
or 120 seconds, or turn auto clear off so that temporary settings are never
automatically cleared.
1 COPY
Press
2
Press .
3
Press a number key to select the
desired setting:
: 30 SEC
: 60 SEC
: 120 SEC
: OFF
4
Press repeatedly to exit.
SCAN
(or ) and then
General Machine Settings
Display:
MENU
.
COMMON SETTING
1: 30 SECONDS
The display briefly shows
your selection, then:
3: KEY TONE
49