Sharp AM-400 Online Manual page 62

Default copy contrast setting
The default contrast setting (page 55) is medium (this is the setting that is
used if you do not make a selection). If desired, you can change the default
contrast to a higher or lower level.
1
MENU
Press
until the display at right appears.
2
Press .
3
Z
Press to decrease the default contrast level, or
default contrast level.
4
Press
ENTER
5
Press repeatedly to exit.
Z
and then or
.
Permanent Copy Settings
Display:
A
COPY SETTING
-[ ■ ■ ■ ■
]+
A
to increase the
59