Sharp AM-300 Quick Setup Manual

AM-300/400
QUICK SETUP GUIDE
For detailed instructions
on setting up and using the AM-300/400, see the
online guide on the CD-ROM.
To open the guide, double-click the Manual folder on
the CD-ROM, double-click English, and then double-
click Online Manual.pdf.
(Note: Acrobat Reader 5.05 or higher is required to
view the manual.To install Version 5.05, double-click
Acrobat Reader, English, and then ar505enu.exe
on the CD-ROM.)
All company names and product names appearing in this
setup guide are the trademarks of their respective owners.
3
Important:
Pull the scanner release toward you to
release the scanner lock.
Caution: Be sure to release the scanner lock
before plugging in the power cord.
6
Install the toner cartridge and drum cartridge.
➊
1. Press . Open the side cover
➋
and then the front cover
1
3
2
5. Insert the toner cartridge, sliding it along
the guides until it clicks into place .
Press on the arrow
mark to make sure
the cartridge clicks
into place
7
Load paper.
1. Remove the output tray.
3. Squeeze the sides of the paper
guide and slide it to the slot for
the length of paper loaded.
1
Make sure you have the following items. If any
are missing, contact your dealer or retailer.
Note: The shape of the line cord plug varies by
country. An adapter (not shown) is provided in
some countries.
Telephone line
cord
(AM-400
only)
Output tray
4
Plug the power cord into a standard, earthed
power outlet.
Note: The power outlet must be installed
near the equipment and must be easily
accessible.
Note: The
shape of the
power plug
varies by
country
2. Remove the drum cartridge from its
➌
packaging.
.
Caution!
Do not touch the fusing unit
under the side cover after the
machine has been in operation,
as it may become very hot.
6. Close the front cover
then the side cover
1
2. Insert a stack of paper
into the tray, print side up.
The stack should
not be higher
than this line
4. Replace the output tray.
Toner Drum
cartridge cartridge
Document Setup CD-ROM
Guide
feeder tray
3. Insert the drum cartridge,
sliding it along the guides.
Grasp this handle to
push the cartridge in
➊
7. Press
to select
and
➋
.
then press
the toner cartridge counter.)
Display:
TONER EXCHANGED?
2
1:YES, 2:NO
8
AM-400 only: Set the date and time
that appear in the fax mode display.
1. In the date and time display of fax mode
FAX
(press if needed to select fax
MENU
mode), press ,
2. Enter a two-digit number for the day
("01" to "31").
Example: the 5th
•
Z
To clear a mistake press
3. Enter a 2-digit number for the month.
Example: February
4. Enter the year (four digits)
Example:
2
Attach the trays.
When the tray
stops, lift the
end slightly
and push in.
5
AM-400 only: Connect the phone line cord
to the TEL. LINE jack and a wall jack.
Italy: Use the provided adapter to connect the
line cord to the wall socket.
Note: The
shape of the
line cord plug
varies by
country.
4. Remove the toner cartridge from its
packaging. Shake the cartridge side
to side four or five times to distribute
the toner evenly within the
cartridge.
8. Reset the drum cartridge counter:
"YES" and
MENU
. (This resets
a.Press
A
until "LIFE" appears in the
display.
b. Press
c. Press
5. Enter a two-digit number for the hour
(00 to 23) and a two-digit number for
the minute (00 to 59).
, .
Example: 9:25
6. Press .
ENTER
7. Press repeatedly to exit.
.
PRINTED IN THAILAND (TCADH3785XHZZ)
English
Z
once and then or
and then .
repeatedly to exit.