Sharp AM-400 Online Manual page 81

Other Fax Transmission Settings
Automatic redialling when the line is busy
If you use Direct Keypad Dialling, Speed Dialling, or Search Dialling to send a
fax and the line is busy, the machine will automatically redial the number. The
machine will make two redial attempts at intervals of five minutes.
♦
To cancel a job that is waiting for automatic redialling, follow the procedure
in Checking and cancelling stored fax jobs on page 77. (When you scroll to
the job during the procedure, the number or name of the destination will
alternate with RECALL: BUSY in the display.)
♦
Under certain conditions (for example if a person answers the call on a
telephone), automatic redialling may stop before two redial attempts are
made.
Automatic redialling after a line error
If you use Direct Keypad Dialling, Speed Dialling or Search Dialling to send a
fax and a line error occurs during the transmission, the machine will
automatically redial the number and attempt to complete the transmission.
Retransmission will begin from the page which was being transmitted when
the error occurred. The machine will make one attempt at retransmission after
an interval of two minutes.
♦
To cancel a job that is waiting for automatic redialling, follow the procedure
in Checking and cancelling stored fax jobs on page 77. (When you scroll to
the job during the procedure, the number or name of the destination will
alternate with RECALL: ERROR in the display.)
78