Sharp AM-400 Online Manual page 125

Scanning From the Operation Panel
2
. In the Scan Button Destination Settings window, click the tab of the scan
menu that you want to configure. Adjust the settings as explained below.
♦
The SC1 tab (initially linked to Sharpdesk) is shown as an example.
•
If you wish to assign a different application to the scan menu, select the
desired application in Application Selection.
•
In File Format, select the format of the image file that will be created.
Note: File Format appears when Sharpdesk, E-mail, or Microsoft Word is
selected as the application. See the following pages for the settings that
appear in this field when FAX, OCR, or Filing is selected.
•
If you wish to have the TWAIN driver open on your computer during
scanning from the operation panel to allow you to select scan settings,
select Show TWAIN setting screen when scanning.
•
In the Scan Setup field, select the Colour Mode, Image Area, and
Resolution.
122