Sharp AM-400 Online Manual page 123

Scanning From the Operation Panel
Scanning a document from the operation panel
1 SCAN
Press
2
Place the original on the document glass or in the auto document
feeder.
Using the document glass:
Open the document glass cover and place
the original face down on the glass with
the top edge against the document guide.
•
Make sure the centre of the original is
aligned with the centre mark on the
document guide, and then close the
cover.
•
Important: Make sure the glass is
clean. Any dirt, fingerprints, hair, or
other debris may affect the quality of
the scanned image.
Using the auto document feeder:
Adjust the document guide to the width of
your original(s), and then insert the
originals face up into the feeder.
•
Up to 20 A4-size sheets can be
inserted at once. Note that some
applications may only allow you to scan
one page at a time.
•
For detailed information on using the
auto document feeder and the types of
originals that can be used, see pages
60 to 62.
Note: If an original is placed in both the auto document feeder and on the
document glass, the original in the auto document feeder will be used.
120
to select scan mode.
The currently selected
scan menu appears
Display:
∗∗ SCAN ∗∗
SCAN : SC1