Using Fax Only Mode - Sharp AM-400 Online Manual

Using FAX ONLY Mode

When the reception mode is set to FAX ONLY, the machine will automatically
answer all calls on two rings and receive incoming faxes.
♦
The number of rings on which the machine answers can be changed as
explained below.
♦
When the reception mode is set to FAX ONLY mode, the machine will
receive faxes automatically no matter whether it is in copy, fax, or scan
mode.
Changing the number of rings
If desired, you can change the number of rings on which the machine answers
incoming calls in FAX ONLY mode. Any number from 2 to 4 can be selected.
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press ) and then press
2
Press .
3
Press .
4
Enter the desired number of rings (any
number from 2 to 4).
Example: 3 rings
5
Press repeatedly to exit.
MENU
.
Using FAX ONLY Mode
Display:
FAX SETTING
1:RECEPTION MODE
ENTER (2-4) (2)
NUMBER OF RING
The display briefly shows
your selection, then:
3: RECEIVE RATIO
91