Sharp AM-400 Online Manual page 76

Editing and deleting auto-dial numbers
If you need to make changes to a previously stored auto-dial number, or clear
a number, follow these steps:
1
Make sure that the date and time
display of fax mode appears (if needed
FAX
press ) and then press
2
Press .
3
Press .
4
Press .
5
Press
6
Enter the 2-digit Speed Dial number that you wish to edit or delete (for
example, press
number of the destination appears in the display and press
•
If you pressed
7
If you selected EDIT in Step 5, make the desired changes to the number.
•
To move the cursor to the right, press
that you wish to change, simply enter the new digit. The new digit will
replace the old digit. To backspace and clear digits, press
•
If you do not wish to change the number, go directly to Step 8.
MENU
to edit a number, or
), or press
for CLEAR in Step 5, go to Step 12.
Storing a Number for Speed Dialling
Display:
FAX SETTING
.
1: SPEED DIAL
1: NEW, 2: CHANGE
1: EDIT, 2: CLEAR
to delete a number.
Z
A
or until the name or fax
A
. When the cursor is over a digit
.
ENTER
Z
.
73