Digital Keystone Correction - Sharp Notevision PG-C20XA Operation Manual

Setting up the Screen
Projector
ON/OFF
LAMP
POWER
2, 3, 4
TEMP.
KEYSTONE
2, 3
INPUT AUTO SYNC
1, 5
BACK ENTER MENU
(GUI) On-screen Display
Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
INPUT AUTO SYNC
BACK ENTER MENU
Remote control
Remote control
1

Digital Keystone Correction

• When the image is distorted due to the projection
angle, the digital keystone correction function allows
you to correct it.
• The digital keystone correction can be made by
pressing KEYSTONE, or by setting "Keystone"
correction in the GUI menu.
Using the GUI menu
1
Press MENU.
2
Press to select "Options", and then press
∂/ƒ
ENTER.
3
Press to select "Keystone", and then press
∂/ƒ
ENTER.
4
Press to move the
∂/ƒ
setting.
5
To exit from the GUI, press MENU.
• To reset the keystone setting, press BACK.
• Straight lines and the edges of the displayed image may
appear jagged, when adjusting the keystone setting.
Using the KEYSTONE buttons
1
Press KEYSTONE to adjust the setting.
mark to the desired
20