Sharp PG-C30XE Service Manual

Hide thumbs Also See for PG-C30XE:

Operation manual (64 pages)

Operation manual (66 pages)

Handy manual (47 pages)

100

101

102

103

104

105

106

107

Table of Contents

Quick Links

SHARP CORPORATION

LCD PROJECTOR

LCD PROJEKTOR

PG-C30XE

INHALT

BETRIEBSSTUNDENZÄHLERS (GESAMTZEIT) .... 57

BRENNPUNKT ......................................................... 59

SCHALTPLANS ........................................................ 92

Ë ELEKTRISCHE BAUTEILE ................................ 144

Ë GEHÄUSE UND MECHANISCHE BAUTEILE ... 164

Ë ZUBEHÖRTEILE ................................................ 170

Ë VERPACKUNGSTEILE ...................................... 170

PG-C30XE

S80H3PG-C30XE

Seite

Table of Contents

Summary of Contents for Sharp PG-C30XE

Page 1: Table Of Contents
PG-C30XE SERVICE MANUAL SERVICE-ANLEITUNG S80H3PG-C30XE LCD PROJECTOR LCD PROJEKTOR MODEL PG-C30XE MODELL In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.
Page 2: Note To Service Personnel
CAP on the opening during servicing to avoid eye and skin exposurem (Fig. 1). Note: Please obtain a lens cap before servicing a model PG-C30XE that is received without one. UV-Radiation and Medium Pressure Lamp Precautions LENS CAP 1.
Page 3: Specifications
(TINS-7046CEZZ), LCD projector quick references (TINS-7048CEZZ, TINS-7152CEZZ, TINS-7153CEZZ), Sharp Advanced Presentation Software operation manual (TINS- 7069CEZZ) This SHARP projector uses LCD (Liquid Crystal Display) panels. These This unit has some inactive TFTs within acceptable tolerances which × very sophisticated panels contain 786,432 pixels ( RGB) TFTs (Thin may result in illuminated or inactive dots on the picture screen.
Page 4: Location Of Controls
PG-C30XE Location of Controls Projector LAMP REPLACEMENT MUTE button indicator TEMPERATURE WARNING POWER indicator indicator VOLUME buttons (+ / – ) POWER buttons (ON/OFF) KEYSTONE button MENU button AUTO SYNC button INPUT button RESIZE button FREEZE button ENLARGE button GAMMA button...
Page 5: Operating The Wireless Mouse Remote Control
PG-C30XE Operating the Wireless Mouse Remote Control Remote Control Front View Rear View MUTE button POWER buttons VOLUME buttons (ON/OFF) ( + / – ) LEFT-CLICK button KEYSTONE/BLACK LASER POINTER/ SCREEN button MENU button MOUSE/ RIGHT-CLICK/ ADJUSTMENT ENTER button buttons ('/"/\/|)
Page 6: Using The Remote Control As A Wireless Mouse
PG-C30XE Using the Remote Control as a Wireless Mouse The remote control has the following three functions: MOUSE/ADJUSTMENT switch • Projector control (Remote control) • Wireless mouse • Laser pointer MOUSE ADJ. MOUSE ADJ. Wireless mouse Projector control Laser pointer Remote Control/Mouse Receiver Positioning •...
Page 7 PG-C30XE Effective buttons in MOUSE mode Use as a Wireless Mouse Be sure the supplied remote mouse receiver is Remote control connected to your computer. (Front view) (Slide the MOUSE/ADJUSTMENT switch on LASER POINTER MOUSE ADJ. the remote control to the MOUSE position.) BLACK SCREEN •...
Page 8: Connection Pin Assignments
PG-C30XE Connection Pin Assignments Analog Computer 1 and 2 Signal Input Ports: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (red) 9. Not connected 2. Video input 10. GND (green/sync on green) 11. GND 3. Video input (blue) 12.
Page 9 PG-C30XE Dimensions Rear View Top View 97.5 96.5 Side View 243.5 10.5 Front View Bottom View Units: mm...
Page 10: Removing Of Major Parts
PG-C30XE REMOVING OF MAJOR PARTS 1. Removing the Intake cover and lamp unit 1-1. Detach the Intake cover. 1-2. Loosen the lamp cover screw and draw out the lamp cover in the direction of arrow (toward yourself). 1-3. Remove the two lamp unit lock screws. Detach the lamp unit.
Page 11 PG-C30XE 2. Removing the top and rear cabinets 2-1. Remove the four rear cabinet lock screws. 2-2. Remove the four terminal board lock screws off the rear cabinet. Unhook and detach the rear cabinet from below. 2-3. Remove the four top cabinet lock screws from below.
Page 12: Removing The Pwb Units
PG-C30XE 3. Removing the PWB units 3-1. Disconnect the connectors from the output unit. 3-2. Remove the four PC I/F unit lock screws, and take out the PC I/F unit. 3-3. Remove the spacer (stud bolt) and the three screws off the output unit. Lift the output unit, together with the signal unit, off the position.
Page 13: Removing The Optical Mechanism Unit
PG-C30XE 4. Removing the optical mechanism unit 4-1. Remove the six optical mechanism unit lock screws. Lift the unit off the position. 4-2. Remove the two lamp socket holder lock screws and take out the holder. Duct Fan Unit Optical Mechanism Unit...
Page 14 PG-C30XE 5. Removing the Power/Ballast unit assembly 5-1. Remove the Power/Ballast unit assembly lock screw. 5-2. Remove the (FG) lead lock screw. 5-3. Lift the Power/Ballast unit assembly off the position. 6. Removing the ballast unit and inlet unit 6-1. Disconnect the connector (PA) from the inlet unit. Take out the AC power switch.
Page 15: Resetting The Total Lamp Timer
“ ” will flash in yellow in the type BQC-PGC30XE/1 from your lower-left corner of the picture. nearest Sharp Authorised LCD Projector Dealer or Service Centre. A significant deterioration of the • Replace the lamp. If you wish, you picture and colour quality occurs.
Page 16: The Optical Unit Outline
PG-C30XE THE OPTICAL UNIT OUTLINE Layout of the optical system Note: Layout for positioning the optical system. Projection Lens Incident polarizing plate B emergent polarizing plate R AR coating Dichroic coating (R transmission) emergent polarizing plate B B-LCD R-LCD Cross dichroic prism...
Page 17: Convergence And Focus Adjustment
PG-C30XE CONVERGENCE AND FOCUS ADJUSTMENT » Start the convergence and focus adjustments with the top panel removed but the power on. Use the remote control to adjust the image. Take the following procedures. 1. Focusing the projection lens (A) Replacing all the 3 LCD panels 1.
Page 18: Convergence And Focus Adjustments Mechanism
PG-C30XE 4. With the G-LCD panel's screen center as refernce, adjust the R-LCD and B-LCD panels. 5. Finally tighten up the convergence lock screw "d". Notes : 1 The eccentric cam is used for convergence adjustment. This means that the cam's turning and the linear movement are not always uniform.
Page 19 PG-C30XE Convergence and Focus Adjustments at a Glance Adjustment directions Adjustment Direction Definition Direction of LCD panel X direction LCD right and left Convergence Y direction LCD top and bottom θZ direction Rotation around Z axis LCD turning axis Z direction LCD optical axis θX direction...
Page 20 PG-C30XE Replacing the LCD panels Detach the top panel and the optical mechanism unit in advance. (1) Remove the four prism holder lock screws. Detach the prism holder from the optical mechanism unit. (2) Remove the LCD panel lock screws (four each for the R-, G- and B-LCD panels). Detach the LCD panels from the prism holder.
Page 21 PG-C30XE Adjusting the optical axis of the mirrors (M1, M5 and M4/M6) The optical axis must be readjusted if an eclipse happens with the R. G or B mirrors. Generally speaking, this adjustment is needed when any of the internal optical components has been replaced.
Page 22: Electrical Adjustment
PG-C30XE ELECTRICAL ADJUSTMENT Hook up a signal generator, or a DOSV or Mac personal computer to the projector in order to feed the signals specified in the Adjusting conditions. Adjusting point Adjusting conditions Adjusting procedure » Make the following settings: EEPROM 1.
Page 23 PG-C30XE Adjusting point Adjusting conditions Adjusting procedure » Adjust the PSIG waveform to the one shown below. P SIGNAL 1. Connect the oscilloscope to TP1701 for red. (Adjust with PSIG-H.) TP1702 for green TP1703 for blue. PSIG 7.3±0.2V DC 2. Make the following choice: Group : OUTPUT 2 2.0V DC...
Page 24 PG-C30XE Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller RGB counter- 1. Feed the black-and-red voltage (25%) stripe signal (XGA). buttons, adjust the data in order to minimize the adjustment 2. Make the following choice: flicker.
Page 25 PG-C30XE Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller Video 1. Feed the baseband (split brightness colour bar) signal. (The ON- buttons, adjust the setting until the black signal adjustment AIR signal is not accepted becomes bit-less.
Page 26 PG-C30XE Adjusting point Adjusting conditions Adjusting procedure » Select R1-GAIN and adjust the setting so that the Video input 1. Feed the NTSC 10-step sig- panel signal nal. R and G signals have the same amplitude. » For the blue colour, adjust the setting the same amplitude 2.
Page 27 PG-C30XE Adjusting point Adjusting conditions Adjusting procedure » In the process mode and select L4. Check the pic- 1. Receive the RGB signal. performance ture, brightness, red, blue, clock, phase, horizontal check position, and vertical position. » In the process mode and select OFF. Make sure that...
Page 28: Adjusting The Pc Board
PG-C30XE ADJUSTING THE PC BOARD (CPCi-0047CE02. PC I/F Unit) 1. Setting the oscilloscope Set the range to DC 1 V/div and 5µs/div. 2. Connecting the PC interface 1) Connect the PC interface to the projector. Make surethe CON2 (P8404), CON3 (P8502) and CON4 (P8405)connectors are all tight in position.
Page 29: Trouble Shooting Table
PG-C30XE TROUBLE SHOOTING TABLE Checking the PWB performance Video input in trouble RGB input in trouble Through-output in trouble Remote control in trouble Go to "Checking the video unit Feed test pattern signal from Through-output circuit in Go to "Checking the remote circuit".
Page 30: Checking The Video Unit Circuit
PG-C30XE TROUBLE SHOOTING TABLE (Continued) Checking the video system Is the lamp on? Go to "Lamp fails to light-up". Is specified voltage fed to EA connectors? Check the power circuit and its parts. Are there signal inputs at pins (3) and...
Page 31 PG-C30XE TROUBLE SHOOTING TABLE (Continued) Checking IC801 (RGB signal output circuit) Are there RGB output waveforms at pins (31), (32) and (33) of IC801? Go to "No colour or unusual tone", Check the data transfer and other "No Y signal" or "Out of sync".
Page 32 PG-C30XE TROUBLE SHOOTING TABLE (Continued) Checking IC806 (3-D noise reduction circuit) and its peripheral circuits Are there signal inputs at pins (40) (Y signal) and (45)(chroma signal) of IC806? Check the buffer circuit of Q814 thru Q816 as well as Q903 thru Q906.
Page 33: No Or Unusual Horizontal Sync
PG-C30XE TROUBLE SHOOTING TABLE (Continued) No or unusual Y signal Is there Y signal input at pin (21) of IC801? Go back to the signal processing block. Is there Y signal output at pin (40) of IC801? Check IC801 and its peripheral circuits.
Page 34 PG-C30XE TROUBLE SHOOTING TABLE (Continued) Checking the output PWB unit Are there signal inputs at SC1404, SC1405, SC1501 and SC1502? Are voltages applied to EA connectors and SC5502? If there is no signal at EA If there is no signal at SC1404...
Page 35: No Audio Output
PG-C30XE TROUBLE SHOOTING TABLE (Continued) No audio output Are there audio signal inputs at pin (2) of IC1411? Check the input, the switching circuit of IC3303 and IC3304, and their peripheral circuit,SC3001,SC1502,etc. Are there audio signal outputs at pin (2) of P5508? Check the IC1411 control voltage,and its peripheral circuits.
Page 36 PG-C30XE TROUBLE SHOOTING TABLE (Continued) Power on Is the right input selected? Select the right input with remote control. Are the PC, video and LCP cables as specified and properly connected? Use the right cables or reconnect the cables. With the contrast control at maximum, does the image appear? Readjust the video system.
Page 37: Lamp Fails To Light-Up
PG-C30XE TROUBLE SHOOTING TABLE (Continued) Lamp fails to light-up Turn on the power switch. Is discharging sound heard from the lamp? Is the lamp out of socket? Is the ballast cooling fan running? Replace the Reconnect the lamp. lamp into socket.
Page 38 PG-C30XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-1 Checking the clock circuit and its peripheral circuits X8001 or its peripheral part faulty. Is X8001 (6MHz) oscillating? X8003 or its peripheral part faulty. Is X8003 (1.84MHz) oscillating? Is X8004 (22.165MHz) oscillating? X8004 or its peripheral part faulty.
Page 39 PG-C30XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-2 Checking the PLL circuit and its peripheral circuits Are there signals at pin(111) of IC8606 and TL8606? IC8025 or its peripheral circuit faulty. Are there signals at pins (100) and (101) of IC8606? IC8606 or its peripheral circuit faulty.
Page 40 PG-C30XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-3 Checking the S- Checking the VGA's XGA's red video red video circuit and circuit and its its peripheral peripheral circuits circuits Is there signal at pin (139) of IC8606? Is there signal at pin (139) of IC8606? output PWB faulty.
Page 41 PG-C30XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-4 Checking the S- Checking the VGA's XGA's green video green video circuit circuit and its and its peripheral peripheral circuits circuits Is there signal at pin (124) of IC8606? Is there signal at pin (124) of IC8606? output PWB faulty.
Page 42 PG-C30XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-5 Checking the S- Checking the VGA's XGA's blue video blue video circuit circuit and its and its peripheral peripheral circuits circuits Is there signal at pin (133) of IC8606? Is there signal at pin (133) of IC8606? outpur PWB faulty.
Page 43 PG-C30XE TROUBLE SHOOTING TABLE FOR PC I/F UNIT-6 Checking the OSD circuit and its peripheral circuits Display OSD on the screen. Are there signals at pins (56), (58), (71) and (72) of IC8048? IC8029 or its peripheral circuit faulty. Are there signals at pins (12), (14) thru (17) and (20) of IC8048? IC8048 or its peripheral circuit faulty.
Page 44: Chassis Layout
PG-C30XE CHASSIS LAYOUT / CHASSIS-ANORDNUNG OUTPUT UNIT DUNTKA215DE02 PC I/F UNIT CPCI-0047CE02 INLET UNIT RUNTK0677CEZZ SIGNAL UNIT DUNTKA211DE02 S-OUT/REG UNIT DUNTKA214DE02 VIDEO UNIT DUNTK9769DE21 POWER UNIT BALLAST UNIT RDENC0311CEZZ RDENC0313CEZZ PC TERMINAL UNIT DUNTKA212DE02...
Page 45: Block Diagram
PG-C30XE BLOCK DIAGRAM / BLOCKSCHALTBILD...
Page 46: Overall Wiring Diagram
PG-C30XE OVERALL WIRING DIAGRAM / GESAMTSCHALTPLAN...
Page 47: Description Of Schematic Diagram
PG-C30XE DESCRIPTION OF SCHEMATIC BESCHREIBUNG DES DIAGRAM SCHEMATISCHEN SCHALTPLANS VOLTAGE MEASUREMENT CONDITION: SPANNUNGSMESSUNGEN: 1. Spannungen an den Prüfpunkten werden bei einer 1. Voltages at test points are measured at the supply Netzspannung von 230V gemessen, Signale werden voltage of AC 230V. Signals are fed by a colour bar für die Wartung mit einem Farbbalken-Signal...
Page 48: Waveforms
PG-C30XE WAVEFORMS / WELLENFORMEN SC1101 18-pin SC1101 19-pin SC1201 19-pin SC1201 18-pin (RP SIG5) (RP SIG6) (GP SIG6) (GP SIG5) H : 10µsec/div H : 10µsec/div H : 10µsec/div H : 10µsec/div V : 2V/div V : 2V/div V : 2V/div...
Page 49 PG-C30XE Ë SIGNAL UNIT-1/2 / SIGNALEINHEIT-1/2...
Page 50 PG-C30XE Ë SIGNAL UNIT-2/2 / SIGNALEINHEIT-2/2...
Page 51 PG-C30XE Ë PC TERMINAL UNIT / PC-ANSCHLUßEINHEIT...
Page 52 PG-C30XE Ë SOUND OUT and REGULATOR UNIT / TONAUSGABE-und REGLEREINHEIT...
Page 53 PG-C30XE Ë OUTPUT UNIT-1/6 / AUSGABEEINHEIT-1/6...
Page 54 PG-C30XE Ë OUTPUT UNIT-2/6 / AUSGABEEINHEIT-2/6...
Page 55 PG-C30XE Ë OUTPUT UNIT-3/6 / AUSGABEEINHEIT-3/6...
Page 56 PG-C30XE Ë OUTPUT UNIT-4/6 / AUSGABEEINHEIT-4/6...
Page 57 PG-C30XE Ë OUTPUT UNIT-5/6 / AUSGABEEINHEIT-5/6...
Page 58 PG-C30XE Ë OUTPUT UNIT-6/6 / AUSGABEEINHEIT-6/6...
Page 59 PG-C30XE Ë VIDEO UNIT / VIDEOEINHEIT...
Page 60 PG-C30XE Ë POWER and INLET UNIT / NETZ-und EINGANGSEINHEIT (POWER) (INLET)
Page 61 PG-C30XE Ë PC I/F UNIT-1/9 / PC-I/F EINHEIT-1/9...
Page 62 PG-C30XE Ë PC I/F UNIT-2/9 / PC-I/F EINHEIT-2/9...
Page 63 PG-C30XE Ë PC I/F UNIT-3/9 / PC-I/F EINHEIT-3/9...
Page 64 PG-C30XE Ë PC I/F UNIT-4/9 / PC-I/F EINHEIT-4/9...
Page 65 PG-C30XE Ë PC I/F UNIT-5/9 / PC-I/F EINHEIT-5/9...
Page 66 PG-C30XE Ë PC I/F UNIT-6/9 / PC-I/F EINHEIT-6/9...
Page 67 PG-C30XE Ë PC I/F UNIT-7/9 / PC-I/F EINHEIT-7/9...
Page 68 PG-C30XE Ë PC I/F UNIT-8/9 / PC-I/F EINHEIT-8/9...
Page 69 PG-C30XE Ë PC I/F UNIT-9/9 / PC-I/F EINHEIT-9/9...
Page 70: Printed Wiring Board Assemblies
PG-C30XE PRINTED WIRING BOARD ASSEMBLIES/ LEITERPLATTENEINHEITEN Signal Unit (Wiring Side)/ Signaleinheit (Leiterbahnseite) PC Terminal Unit (Wiring Side)/ PC-Anschlußeinheit (Leiterbahnseite) Video Unit (Wiring Side)/ Videoeinheit (Leiterbahnseite)
Page 71 PG-C30XE Signal Unit (Component Side)/ Signaleinheit (Bestückungsseite) PC Terminal Unit (Component Side)/ PC-Anschlußeinheit (Bestückungsseite) Video Unit (Component Side)/ Videoeinheit (Bestückungsseite)
Page 72 PG-C30XE Output Unit (Wiring Side)/ Ausgabeeinheit (Leiterbahnseite)
Page 73 PG-C30XE Output Unit (Component Side)/ Ausgabeeinheit (Bestückungsseite)
Page 74 PG-C30XE PC I/F Unit (Wiring Side)/ PC-I/F-Einheit (Leiterbahnseite) PC I/F Unit (Component Side)/ PC-I/F-Einheit (Bestückungsseite)
Page 75 PG-C30XE Sound Out/Regulator Unit (Wiring Side)/ Tonausgabe/Reglereinheit (Leiterbahnseite) Sound Out/Regulator Unit (Component Side)/ Tonausgabe/Reglereinheit (Bestückungsseite)
Page 76 PG-C30XE Sound Out/Regulator Unit (Wiring Side)/ Tonausgabe/Reglereinheit (Leiterbahnseite) Sound Out/Regulator Unit (Component Side)/ Tonausgabe/Reglereinheit (Bestückungsseite)
Page 77 PG-C30XE Power Unit (Wiring Side)/ Netzeinheit (Leiterbahnseite) Power Unit (Component Side)/ Netzeinheit (Bestückungsseite)
Page 78 PG-C30XE Inlet Unit (Wiring Side)/ Eingangseinheit (Leiterbahnseite) Inlet Unit (Component Side)/ Eingangseinheit (Bestückungsseite)
Page 79: Ersatzteilliste
PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code PARTS LIST ERSATZTEILLISTE AUSTAUSCH VON TEILEN PARTS REPLACEMENT Ersatzteile, die besondere Sicherheitseigenschften haben, sind in Replacement parts which have these special safety characteristics dieser Anleitung markiert. Elektrische Komponenten mit solchen identified in this manual: electrical components having such fea- Eigenshaften sind in den Ersatzteil durch "å"...
Page 80 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA211DE02 C827 VCE9PF1HW105M J 1.0 Elect.(N.P) C828 VCE9PF1HW105M J 1.0 Elect.(N.P) SIGNAL UNIT (Continued) C829 VCEAPF1CW226M J 22 Electrolytic C830 VCKYCY1EF104Z J 0.1 Ceramic Q910 VS2SC3928AR-1 J 2SC3928AR...
Page 81 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA211DE02 R808 VRS-CY1JF561J J 560 1/16W Metal Oxide R811 VRS-CY1JF681J J 680 1/16W Metal Oxide SIGNAL UNIT (Continued) R812 VRS-CY1JF183J J 18k 1/16W Metal Oxide R815 VRS-TX2HF5R6J J 5.6...
Page 82 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA211DE02 FB903 RBLN-0065CEZZ J Frrite Bead FB904 RBLN-0065CEZZ J Frrite Bead SIGNAL UNIT (Continued) P401 QPLGZ3044CEZZ J Plug 30-pin (TN) P402 QPLGZ3044CEZZ J Plug 30-pin (VS) R920...
Page 83 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C3029 VCEAPF0JW476M J 47 6.3V Electrolytic DUNTKA212DE02 C3030 VCKYCY1HB103K J 0.01 Ceramic PC TERMINAL UNIT C3031 VCKYCY1HB103K J 0.01 Ceramic C3032 VCEAPF0JW476M J 47 6.3V Electrolytic INTEGRATED CIRCUITS C3033 VCKYCY1HB103K J 0.01...
Page 84 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R3312 VRS-CY1JF105J J 1.0M 1/16W Metal Oxide DUNTKA212DE02 R3319 VRS-CY1JF101J J 100 1/16W Metal Oxide PC TERMINAL UNIT (Continued) R3320 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R3321 VRS-CY1JF101J...
Page 85 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R7311 VRS-CY1JF103J J 10k 1/16W Metal Oxide DUNTKA214DE02 R7312 VRS-TX2HF8R2J J 8.2 1/2W Metal Oxide SOUND OUT/REGULATOR UNIT R7313 VRS-CY1JF223J J 22k 1/16W Metal Oxide R7315 VRS-TX2HF2R2J J 2.2...
Page 86 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code Q1310 VS2SC2411KR-1 J 2SC2411KR DUNTKA215DE02 Q1311 VS2SC2411KR-1 J 2SC2411KR OUTPUT UNIT Q1312 VS2SA1036KR-1 J 2SA1036KR Q1313 VS2SA1036KR-1 J 2SA1036KR INTEGRATED CIRCUITS Q1401 VS2SC2735//-1 J 2SC2735 Q1402 VS2SC2735//-1...
Page 87 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C1213 VCKYCY1EF104Z J 0.1 Ceramic DUNTKA215DE02 C1214 VCKYCY1EF104Z J 0.1 Ceramic OUTPUT UNIT (Continued) C1215 RC-KZ0416CEZZ J 10 Ceramic C1216 VCCCCY1HH220J J 22p Ceramic D5015 VHDMA153///-1 J Diode C1217 VCKYTV1CF105Z J 1.0...
Page 88 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C5056 VCEAPF0JW476M J 47 6.3V Electrolytic DUNTKA215DE02 C5057 VCKYCY1HB103K J 0.01 Ceramic OUTPUT UNIT (Continued) C5058 VCEAPF0JW107M J 100 6.3V Electrolytic C5063 VCEAPF1CW107M J 100 Electrolytic C1438 VCKYCY1CF104Z J 0.1...
Page 89 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1240 VRS-CY1JF103J J 10k 1/16W Metal Oxide DUNTKA215DE02 R1241 VRS-CY1JF101J J 100 1/16W Metal Oxide OUTPUT UNIT (Continued) R1242 VRS-CY1JF101J J 100 1/16W Metal Oxide R1243 VRS-CY1JF000J...
Page 90 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1476 VRS-CY1JF510F J 51 1/16W Metal Oxide DUNTKA215DE02 R1477 VRS-TX2HF000J 1/2W Metal Oxide OUTPUT UNIT (Continued) R1480 VRS-CY1JF101J J 100 1/16W Metal Oxide R1483 VRS-CY1JF122J J 1.2k 1/16W Metal Oxide R1371 VRS-CY1JF222J J 2.2k 1/16W Metal Oxide...
Page 91 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1781 VRS-CY1JF100J J 10 1/16W Metal Oxide DUNTKA215DE02 R1782 VRS-CY1JF100J J 10 1/16W Metal Oxide OUTPUT UNIT (Continued) R1783 VRS-CY1JF100J J 10 1/16W Metal Oxide R1784 VRS-CY1JF100J...
Page 92 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R5534 VRS-CY1JF473F J 47k 1/16W Metal Oxide DUNTKA215DE02 R5535 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide OUTPUT UNIT (Continued) R5536 VRS-CY1JF821J J 820 1/16W Metal Oxide R5537 VRS-CY1JF332J J 3.3k 1/16W Metal Oxide...
Page 93 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA215DE02 DUNTK9769DE21 OUTPUT UNIT (Continued) VIDEO UNIT INTEGRATED CIRCUITS FB1402 RBLN-0059CEZZ J Ferrite Bead FB1405 RBLN-0059CEZZ J Ferrite Bead IC6001 VHiNJM2245M-1 J NJM2245M FB1511 RBLN-0065CEZZ J Ferrite Bead...
Page 94: Power Unit
PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTK9769DE21 RUNTK0677CEZZ VIDEO UNIT (Continued) INLET UNIT PACKAGED CIRCUIT R6007 VRS-CY1JF100J J 10 1/16W Metal Oxide R6008 VRS-CY1JF123J J 12k 1/16W Metal Oxide å TNR761 9FJ0F20001280 J ENE471D10A R6011 VRS-CY1JF4R7J J 4.7...
Page 95 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R727 9FJ0R91201055 J 27 1/10W Chip RDENC0311CEZZ R728 9FJ0R91201405 J 22k 1/10W Chip POWER UNIT R729 9FJ0R91201485 J 100k 1/10W Chip R730 9FJ0R92201115 J 82 1/8W Chip...
Page 96 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code FL8056 9DK001-82026 J Filter, STS104B CPCi-0047CE02 FL8057 9DK001-82026 J Filter, STS104B PC I/F UNIT FL8058 9DK001-82026 J Filter, STS104B FL8600 9DK001-82026 J Filter, STS104B INTEGRATED CIRCUITS FL8601 9DK001-82026...
Page 97 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code C8646 9DK001-42094 J 0.1 Ceramic CPCi-0047CE02 C8647 9DK001-42096 J 0.01 Ceramic PC I/F UNIT (Continued) C8648 9DK001-40079 J 47 Electrolytic C8649 9DK001-42094 J 0.1 Ceramic C8285 9DK001-42096 J 0.01...
Page 98 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code R8254 9DK001-50159 J 22 1/16W Chip1608 CPCi-0047CE02 R8255 9DK001-50159 J 22 1/16W Chip1608 PC I/F UNIT (Continued) R8257 9DK001-50185 J 10k 1/16W Chip1608 R8264 9DK001-50162 J 56...
Page 99: Cabinet And Mechanical Parts
PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code CPCi-0047CE02 CABINET AND MECHANICAL PARTS PC I/F UNIT (Continued) R8613 9DK001-50204 J 150 1/16W Chip1608 Not Available – Top Cabinet Ass’y — R8614 9DK001-50204 J 150 1/16W Chip1608 DBDYT1187CEK1 J Top Cabinet Ass’y...
Page 100: Ë Gehäuse Und Mechanische Bauteile
PG-C30XE CABINET AND MECHANICAL PARTS/ Ref. No. Part No. Description Code Ref. No. Part No. Description Code GEHÄUSE UND MECHANISCHE BAUTEILE...
Page 101 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code 6-18 PLNS-0217CEZZ J CL3 (for Green) CABINET AND MECHANICAL PARTS 6-19 PLNS-0216CEZZ J CL2 (for Red) (Continued) 6-20 PLNS-0151CEZZ J RL1 (Incoming-Light) 6-21 PLNS-0220CEZZ J RL2 Not Available –...
Page 102 PG-C30XE OPTICS MECHANISM PARTS/ Ref. No. Part No. Description Code Ref. No. Part No. Description Code TEILE FÜR OPTIKMECHANISMUS...
Page 103 PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code POWER/BALLAST UNIT PARTS Not Available – Power/Ballast Unit Ass'y — 12-1 9FJ0N00002020 J Case Base 12-2 9FJ0N00002030 J Cover 12-3 9FJ0M41001170 J Fan 12-4 9FJ0A11901620 J Insulating Sheet...
Page 104 PG-C30XE POWER/BALLAST UNIT PARTS/ Ref. No. Part No. Description Code Ref. No. Part No. Description Code TEILE FÜR NETZ-/BALLASTEINHEIT 12-2 12-11 12-14 12-14 12-5 12-14 12-14 12-3 12-12 12-10 12-8 12-10 12-9 12-13 12-4 12-7 12-6 12-1 12-7 12-6...
Page 105: Supplied Accessories
PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) PFiLD0076CEZZ J Extra Air Filter SPAKC5444CEZZ – Packing Case — QACCV4002CEZZ J AC Cord (For Europe) SPAKP0805CEZZ – Polystyrene Cover —...
Page 106: Verpacken Des Geräts
PG-C30XE Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING OF THE SET / VERPACKEN DES GERÄTS Sleeve (Box for Accessories) / Wireless R/C Unit / Hülse Drahtlose Fernbedienungseinheit (Kasten für Zubehör) Remote Mouse Receiver / Fernbedienungs-Mausempfänger...
Page 107: Sharp Corporation
Code Ref. No. Part No. Description Code COPYRIGHT © 2000 BY SHARP CORPORATION ALL RIGHTS RESERVED. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without prior written permission of the publisher.

Sharp PG-C30XE Service Manual

Quick Links

SHARP CORPORATION

Related Manuals for Sharp PG-C30XE

Summary of Contents for Sharp PG-C30XE

Table of Contents