Sharp PG-C30XU Service Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. Notevision PG-C30XU
  6. Service manual

Sharp PG-C30XU Service Manual

Lcd projector
Hide thumbs Also See for PG-C30XU:
Table of Contents

Advertisement

Quick Links

See also: Operating Manual
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored
to its original condition and only parts identical to those specified should be used.
• SPECIFICATIONS ............................................. 2
• NOTE TO SERVICE PERSONNEL ................... 4
• OPERATION MANUAL ...................................... 7
• REMOVING OF MAJOR PARTS ..................... 13
• THE OPTICAL UNIT OUTLINE ........................ 19
FOCUS ADJUSTMENT .................................. 20
• ELECTRICAL ADJUSTMENT .......................... 25
• ADJUSTING THE PC BOARD ......................... 30
• TROUBLE SHOOTING TABLE ........................ 31
• CHASSIS LAYOUT .......................................... 46
SHARP CORPORATION
FINAL PDF
SERVICE MANUAL
LCD PROJECTOR
PG-C30XU
MODEL
CONTENTS
Page
• BLOCK DIAGRAM ........................................... 48
• OVERALL WIRING DIAGRAM ........................ 50
• WAVEFORMS .................................................. 53
• SCHEMATIC DIAGRAM .................................. 54
Ë ELECTRICAL PARTS ................................ 104
Ë CABINET AND MECHANICAL PARTS ...... 124
Ë ACCESSORIES PARTS ............................ 130
Ë PACKING PARTS ....................................... 130
• PACKING OF THE SET ................................. 131
This document has been published to be used for
after sales service only.
The contents are subject to change without notice.
1
PG-C30XU
S99O4XG-NV5XB
Page

Advertisement

Table of Contents
loading

Related Manuals for Sharp PG-C30XU

Summary of Contents for Sharp PG-C30XU

  • Page 1: Table Of Contents

    PG-C30XU FINAL PDF SERVICE MANUAL S99O4XG-NV5XB LCD PROJECTOR PG-C30XU MODEL In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to its original condition and only parts identical to those specified should be used.

  • Page 2: Specifications

    PG-C30XU Specifications × × × × Ω Ω Ω Ω Ω Ω × × × × × × × × ×...

  • Page 3: Important Service Safety Notes

    PG-C30XU IMPORTANT SERVICE SAFETY NOTES Ë Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and servicing guidelines as follows: » Use an AC voltmeter with sensitivity of 5000 ohm per WARNING volt., or higher, sensitivity to measure the AC voltage...

  • Page 4: Note To Service Personnel

    PG-C30XU NOTE TO SERVICE NOTE POUR LE PERSONNEL PERSONNEL D’ENTRETIEN 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5...

  • Page 5: Lamp Replacement

    éviter une exposition des yeux et la peau (Fig. 1). Note: Please obtain a lens cap before servicing a Remarque: Priére de se procurer un capuchon model PG-C30XU that is received without d'optique acant d'entretien un modéle one. PG-C30XU qui est livré sans.
  • Page 6 PG-C30XU WARNING: High brightness light source. Do not stare into the beam of light, or view directly. Be especially careful that children do not stare directly into the beam of light. WARNING: To reduce the risk of fire or electric shock, do not expose this product to rain or moisture.

  • Page 7: Location Of Controls

    PG-C30XU Location of Controls Projector LAMP REPLACEMENT MUTE button indicator TEMPERATURE WARNING POWER indicator indicator POWER buttons (ON/OFF) VOLUME buttons (+/–) MENU button KEYSTONE button INPUT button AUTO SYNC button RESIZE button FREEZE button ENLARGE button GAMMA button BLACK SCREEN button...

  • Page 8: Operating The Wireless Mouse Remote Control

    PG-C30XU Operating the Wireless Mouse Remote Control Remote Control Front View Rear View MUTE button POWER buttons VOLUME buttons (ON/OFF) (+/–) LEFT-CLICK button KEYSTONE/BLACK LASER POINTER/ SCREEN button MENU button MOUSE/ RIGHT-CLICK/ ADJUSTMENT ENTER button " buttons ( UNDO button...

  • Page 9: Using The Remote Control As A Wireless Mouse

    PG-C30XU Using the Remote Control as a Wireless Mouse The remote control has the following three functions: MOUSE/ADJUSTMENT switch • Projector control (Remote control) • Wireless mouse • Laser pointer MOUSE ADJ. MOUSE ADJ. Wireless mouse Projector control Laser pointer Remote Control/Mouse Receiver Positioning •...

  • Page 10: Operation Manual

    PG-C30XU Use as a Wireless Mouse Effective buttons in MOUSE mode Be sure the supplied remote mouse receiver is Remote contr o l connected to your computer. (Front view) (Slide the MOUSE/ADJUSTMENT switch on LASER POINTER MOUSE ADJ. the remote control to the MOUSE position.) BLACK SCREEN •...

  • Page 11: Connection Pin Assignments

    PG-C30XU Connection Pin Assignments Analog Computer 1 and 2 Signal Input Ports: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (red) 9. Not connected 2. Video input 10. GND (green/sync on green ) 11. GND 3. Video input (blue) 12.
  • Page 12 PG-C30XU Dimensions Rear View Top View (97.5) (96.5) (10) (43) 2 (76) Side View (83) (243.5) (229) (10.5) Front View (25) (11) Bottom View Units: inches (mm)

  • Page 13: Removing Of Major Parts

    PG-C30XU REMOVING OF MAJOR PARTS 1. Removing the Intake cover and lamp unit 1-1. Detach the Intake cover. 1-2. Loosen the lamp cover screw and draw out the lamp cover in the direction of arrow (toward yourself). 1-3. Remove the two lamp unit lock screws. Detach the lamp unit.
  • Page 14 PG-C30XU 2. Removing the top and rear cabinets 2-1. Remove the four rear cabinet lock screws. 2-2. Remove the four terminal board lock screws off the rear cabinet. Unhook and detach the rear cabinet from below. 2-3. Remove the four top cabinet lock screws from below.

  • Page 15: Removing The Pwb Units

    PG-C30XU 3. Removing the PWB units 3-1. Disconnect the connectors from the output unit. 3-2. Remove the four PC I/F unit lock screws, and take out the PC I/F unit. 3-3. Remove the spacer (stud bolt) and the three screws off the output unit. Lift the output unit, together with the signal unit, off the position.

  • Page 16: Removing The Optical Mechanism Unit

    PG-C30XU 4. Removing the optical mechanism unit 4-1. Remove the six optical mechanism unit lock screws. Lift the unit off the position. 4-2. Remove the two lamp socket holder lock screws and take out the holder. Duct Fan Unit Optical Mechanism Unit...
  • Page 17 PG-C30XU 5. Removing the Power/Ballast unit assembly 5-1. Remove the Power/Ballast unit assembly lock screw. 5-2. Remove the (FG) lead lock screw. 5-3. Lift the Power/Ballast unit assembly off the position. 6. Removing the ballast unit and inlet unit 6-1. Disconnect the connector (PA) from the inlet unit. Take out the AC power switch.

  • Page 18: Resetting The Total Lamp Timer

    (lamp cage/module) of the current and " " will flash in yellow in the type BQC-PGC30XU/1 from your lower-left corner of the picture. nearest Authorized Sharp Industrial LCD Products Dealer or Service A significant deterioration of the Center. picture and color quality occurs.

  • Page 19: The Optical Unit Outline

    PG-C30XU THE OPTICAL UNIT OUTLINE Layout of the optical system Note: Layout for positioning the optical system. Projection Lens Incident polarizing plate B emergent polarizing plate R AR coating Dichroic coating (R transmission) emergent polarizing plate B B-LCD R-LCD Cross dichroic prism...

  • Page 20: Convergence And Focus Adjustment

    PG-C30XU CONVERGENCE AND FOCUS ADJUSTMENT » Start the convergence and focus adjustments with the top panel removed but the power on. Use the remote control to adjust the image. Take the following procedures. 1. Focusing the projection lens (A) Replacing all the 3 LCD panels 1.

  • Page 21: Convergence And Focus Adjustments Mechanism

    PG-C30XU 4. With the G-LCD panel's screen center as refernce, adjust the R-LCD and B-LCD panels. 5. Finally tighten up the convergence lock screw "d". Notes : 1 The eccentric cam is used for convergence adjustment. This means that the cam's turning and the linear movement are not always uniform.
  • Page 22 PG-C30XU Convergence and Focus Adjustments at a Glance Adjustment directions Adjustment Direction Definition Direction of LCD panel X direction LCD right and left Convergence Y direction LCD top and bottom θZ direction Rotation around Z axis LCD turning axis Z direction LCD optical axis θX direction...
  • Page 23 PG-C30XU Replacing the LCD panels Detach the top panel and the optical mechanism unit in advance. (1) Remove the four prism holder lock screws. Detach the prism holder from the optical mechanism unit. (2) Remove the LCD panel lock screws (four each for the R-, G- and B-LCD panels). Detach the LCD panels from the prism holder.
  • Page 24 PG-C30XU Adjusting the optical axis of the mirrors (M1, M5 and M4/M6) The optical axis must be readjusted if an eclipse happens with the R. G or B mirrors. Generally speaking, this adjustment is needed when any of the internal optical components has been replaced.

  • Page 25: Electrical Adjustment

    PG-C30XU ELECTRICAL ADJUSTMENT Hook up a signal generator, or a DOSV or Mac personal computer to the projector in order to feed the signals specified in the Adjusting conditions. Adjusting point Adjusting conditions Adjusting procedure » Make the following settings: EEPROM 1.
  • Page 26 PG-C30XU Adjusting point Adjusting conditions Adjusting procedure » Adjust the PSIG waveform to the one shown below. P SIGNAL 1. Connect the oscilloscope to TP1701 for red. (Adjust with PSIG-H.) TP1702 for green TP1703 for blue. PSIG 7.3±0.2V DC 2. Make the following choice: Group : OUTPUT 2 2.0V DC...
  • Page 27 PG-C30XU Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller RGB counter- 1. Feed the black-and-red voltage (25%) stripe signal (XGA). buttons, adjust the data in order to minimize the adjustment 2. Make the following choice: flicker.
  • Page 28 PG-C30XU Adjusting point Adjusting conditions Adjusting procedure » Using the control switches or the remote controller Video 1. Feed the baseband (split brightness color bar) signal. (The ON- buttons, adjust the setting until the black signal adjustment AIR signal is not accepted becomes bit-less.
  • Page 29 PG-C30XU Adjusting point Adjusting conditions Adjusting procedure » Select R1-GAIN and adjust the setting so that the Video input 1. Feed the NTSC 10-step panel signal signal. R and G signals have the same amplitude. » For the blue color, adjust the setting the same amplitude 2.
  • Page 30 PG-C30XU Adjusting point Adjusting conditions Adjusting procedure » In the process mode and select L4. Check the pic- 1. Receive the RGB signal. performance ture, brightness, red, blue, clock, phase, horizontal check position, and vertical position. » In the process mode and select OFF. Make sure that...

  • Page 31: Adjusting The Pc Board

    PG-C30XU ADJUSTING THE PC BOARD (CPCi-0047CE01. PC I/F Unit) 1. Setting the oscilloscope Set the range to DC 1 V/div and 5µs/div. 2. Connecting the PC interface 1) Connect the PC interface to the projector. Make surethe CON2 (P8404), CON3 (P8502) and CON4 (P8405)connectors are all tight in position.

  • Page 32: Servicing Precautions

    PG-C30XU Servicing precautions (1) If the convergence gets out of spec in servicing the set, call the process mode and select the following group and subjects. Group: NOKO Subject: R-CNV-H, R-CNV-V G-CNV-H, G-CNV-V B-CNV-H, B-CNV-V (H and V are for horizontal and vertical adjustments, respectively.) Adjust the above settings to the range of 0 to 4.

  • Page 33: Trouble Shooting Table

    PG-C30XU TROUBLE SHOOTING TABLE Checking the PWB performance Video input in trouble RGB input in trouble Through-output in trouble Remote control in trouble Go to "Checking the video unit Feed test pattern signal from Through-output circuit in Go to "Checking the remote circuit".

  • Page 34: Checking The Video Unit Circuit

    PG-C30XU TROUBLE SHOOTING TABLE (Continued) Checking the video system Is the lamp on? Go to "Lamp fails to light-up". Is specified voltage fed to EA connectors? Check the power circuit and its parts. Are there signal inputs at pins (3) and...
  • Page 35 PG-C30XU TROUBLE SHOOTING TABLE (Continued) Checking IC801 (RGB signal output circuit) Are there RGB output waveforms at pins (31), (32) and (33) of IC801? Go to "No color or unusual tone", "No Check the data transfer and other Y signal" or "Out of sync".
  • Page 36 PG-C30XU TROUBLE SHOOTING TABLE (Continued) Checking IC806 (3-D noise reduction circuit) and its peripheral circuits Are there signal inputs at pins (40) (Y signal) and (45)(chroma signal) of IC806? Check the buffer circuit of Q814 thru Q816 as well as Q903 thru Q906.

  • Page 37: No Or Unusual Horizontal Sync

    PG-C30XU TROUBLE SHOOTING TABLE (Continued) No or unusual Y signal Is there Y signal input at pin (21) of IC801? Go back to the signal processing block. Is there Y signal output at pin (40) of IC801? Check IC801 and its peripheral circuits.
  • Page 38 PG-C30XU TROUBLE SHOOTING TABLE (Continued) Checking the output PWB unit Are there signal inputs at SC1404, SC1405, SC1501 and SC1502? Are voltages applied to EA connectors and SC5502? If there is no signal at EA If there is no signal at SC1404...

  • Page 39: No Audio Output

    PG-C30XU TROUBLE SHOOTING TABLE (Continued) No audio output Are there audio signal inputs at pin (2) of IC1411? Check the input, the switching circuit of IC3303 and IC3304, and their peripheral circuit,SC3001,SC1502,etc. Are there audio signal outputs at pin (2) of P5508? Check the IC1411 control voltage,and its peripheral circuits.
  • Page 40 PG-C30XU TROUBLE SHOOTING TABLE (Continued) Power on Is the right input selected? Select the right input with remote control. Are the PC, video and LCP cables as specified and properly connected? Use the right cables or reconnect the cables. With the contrast control at maximum, does the image appear? Readjust the video system.

  • Page 41: Lamp Fails To Light-Up

    PG-C30XU TROUBLE SHOOTING TABLE (Continued) Lamp fails to light-up Turn on the power switch. Is discharging sound heard from the lamp? Is the lamp out of socket? Is the ballast cooling fan running? Replace the Reconnect the lamp. lamp into socket.
  • Page 42 PG-C30XU TROUBLE SHOOTING TABLE FOR PC I/F UNIT-1 Checking the clock circuit and its peripheral circuits X8001 or its peripheral part faulty. Is X8001 (6MHz) oscillating? X8003 or its peripheral part faulty. Is X8003 (1.84MHz) oscillating? Is X8004 (22.165MHz) oscillating? X8004 or its peripheral part faulty.
  • Page 43 PG-C30XU TROUBLE SHOOTING TABLE FOR PC I/F UNIT-2 Checking the PLL circuit and its peripheral circuits Are there signals at pin(111) of IC8606 and TL8606? IC8025 or its peripheral circuit faulty. Are there signals at pins (100) and (101) of IC8606? IC8606 or its peripheral circuit faulty.
  • Page 44 PG-C30XU TROUBLE SHOOTING TABLE FOR PC I/F UNIT-3 Checking the S- Checking the VGA's XGA's red video red video circuit and circuit and its its peripheral peripheral circuits circuits Is there signal at pin (139) of IC8606? Is there signal at pin (139) of IC8606? output PWB faulty.
  • Page 45 PG-C30XU TROUBLE SHOOTING TABLE FOR PC I/F UNIT-4 Checking the S- Checking the VGA's XGA's green video green video circuit circuit and its and its peripheral peripheral circuits circuits Is there signal at pin (124) of IC8606? Is there signal at pin (124) of IC8606? output PWB faulty.
  • Page 46 PG-C30XU TROUBLE SHOOTING TABLE FOR PC I/F UNIT-5 Checking the S- Checking the VGA's XGA's blue video blue video circuit circuit and its and its peripheral peripheral circuits circuits Is there signal at pin (133) of IC8606? Is there signal at pin (133) of IC8606? outpur PWB faulty.
  • Page 47 PG-C30XU TROUBLE SHOOTING TABLE FOR PC I/F UNIT-6 Checking the OSD circuit and its peripheral circuits Display OSD on the screen. Are there signals at pins (56), (58), (71) and (72) of IC8048? IC8029 or its peripheral circuit faulty. Are there signals at pins (12), (14) thru (17) and (20) of IC8048? IC8048 or its peripheral circuit faulty.

  • Page 48: Chassis Layout

    PG-C30XU CHASSIS LAYOUT OUTPUT UNIT DUNTKA215FE01 PC I/F UNIT CPCI-0047CE01 INLET UNIT RUNTK0677CEZZ SIGNAL UNIT DUNTKA211DE01 S-OUT/REG UNIT DUNTKA214DE01 VIDEO UNIT DUNTK9769DE20 POWER UNIT BALLAST UNIT RDENC0311CEZZ RDENC0313CEZZ PC TERMINAL UNIT DUNTKA212DE01...

  • Page 49: Block Diagram

    PG-C30XU BLOCK DIAGRAM...

  • Page 50: Overall Wiring Diagram

    PG-C30XU OVERALL WIRING DIAGRAM...

  • Page 51: Description Of Schematic Diagram

    PG-C30XU DESCRIPTION OF SCHEMATIC DIAGRAM VOLTAGE MEASUREMENT CONDITION: 1. Voltages at test points are measured at the supply voltage of AC 120V. Signals are fed by a color bar signal generator for servicing purpose and the above voltages are measured with a 20k ohm/ V tester.
  • Page 52 PG-C30XU WAVEFORMS SC1101 7-pin SC1101 8-pin SC1201 8-pin SC1201 7-pin (RP SIG5) (RP SIG6) (GP SIG6) (GP SIG5) H : 10µsec/div H : 10µsec/div H : 10µsec/div H : 10µsec/div V : 2V/div V : 2V/div V : 2V/div V : 2V/div...
  • Page 53 PG-C30XU Ë SIGNAL UNIT-1/2...
  • Page 54 PG-C30XU Ë SIGNAL UNIT-2/2...
  • Page 55 PG-C30XU Ë PC TERMINAL UNIT...
  • Page 56 PG-C30XU Ë SOUND OUT/REGULATOR UNIT...
  • Page 57 PG-C30XU Ë OUTPUT UNIT-1/6...
  • Page 58 PG-C30XU Ë OUTPUT UNIT-2/6...
  • Page 59 PG-C30XU Ë OUTPUT UNIT-3/6...
  • Page 60 PG-C30XU Ë OUTPUT UNIT-4/6...
  • Page 61 PG-C30XU Ë OUTPUT UNIT-5/6...
  • Page 62 PG-C30XU Ë OUTPUT UNIT-6/6...
  • Page 63 PG-C30XU Ë VIDEO UNIT...
  • Page 64 PG-C30XU Ë POWER and INLET UNIT (POWER) (INLET)
  • Page 65 PG-C30XU Ë PC I/F UNIT-1/9...
  • Page 66 PG-C30XU Ë PC I/F UNIT-2/9...
  • Page 67 PG-C30XU Ë PC I/F UNIT-3/9...
  • Page 68 PG-C30XU Ë PC I/F UNIT-4/9...
  • Page 69 PG-C30XU Ë PC I/F UNIT-5/9...
  • Page 70 PG-C30XU Ë PC I/F UNIT-6/9...
  • Page 71 PG-C30XU Ë PC I/F UNIT-7/9...
  • Page 72 PG-C30XU Ë PC I/F UNIT-8/9...
  • Page 73 PG-C30XU Ë PC I/F UNIT-9/9...

  • Page 74: Printed Wiring Board Assemblies

    PG-C30XU PRINTED WIRING BOARD ASSEMBLIES Signal Unit (Wiring Side) PC Terminal Unit (Wiring Side) Video Unit (Wiring Side)
  • Page 75 PG-C30XU Signal Unit (Component Side) PC Terminal Unit (Component Side) Video Unit (Component Side)
  • Page 76 PG-C30XU Output Unit (Wiring Side)
  • Page 77 PG-C30XU Output Unit (Component Side)
  • Page 78 PG-C30XU PC I/F Unit (Wiring Side) PC I/F Unit (Component Side)
  • Page 79 PG-C30XU Sound Out/Regulator Unit (Wiring Side) Sound Out/Regulator Unit (Component Side)
  • Page 80 PG-C30XU Power Unit (Wiring Side) Power Unit (Component Side)
  • Page 81 PG-C30XU Inlet Unit (Wiring Side) Inlet Unit (Component Side)

  • Page 82: Parts List

    For location of SHARP Parts Distributor, Q420 VS2SC2411KR-1 J 2SC2411KR Please call Toll-Free; 1-800-BE-SHARP Q421 VS2SC2411KR-1 J 2SC2411KR Q422 VS2SC2411KR-1 J 2SC2411KR in CANADA: Contact SHARP Electronics of Canada Limited Q804 VS2SA1530AR-1 J 2SA1530AR Phone (416) 890-2100. Q805 VS2SC3928AR-1 J 2SC3928AR Q806 VS2SC3928AR-1 J 2SC3928AR...
  • Page 83 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code C865 VCKYCY1EF104Z J 0.1 Ceramic DUNTKA211DE01 C867 VCKYCY1EF104Z J 0.1 Ceramic SIGNAL UNIT (Continued) C868 VCKYCY1HB103K J 0.01 Ceramic C869 VCKYCY1CF224Z J 0.22 Ceramic C437 VCKYCY1CF104Z J 0.1...
  • Page 84 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R852 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide DUNTKA211DE01 R853 VRS-CY1JF103J J 10k 1/16W Metal Oxide SIGNAL UNIT (Continued) R855 VRS-CY1JF221J J 220 1/16W Metal Oxide R856 VRS-CY1JF101J...
  • Page 85 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA211DE01 DUNTKA212DE01 SIGNAL UNIT (Continued) PC TERMINAL UNIT INTEGRATED CIRCUITS R952 VRS-TX2HF6R8J J 6.8 1/2W Metal Oxide R953 VRS-CY1JF101J J 100 1/16W Metal Oxide IC3003 VHiTL712CPW-1 J Tl712CPWR...
  • Page 86 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R3023 VRS-CY1JF101J J 100 1/16W Metal Oxide DUNTKA212DE01 R3024 VRS-CY1JF103J J 10k 1/16W Metal Oxide PC TERMINAL UNIT (Continued) R3025 VRS-TW2ED750J J 75 1/4W Metal Oxide R3026 VRS-TW2ED750J...
  • Page 87 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA212DE01 DUNTKA214DE01 PC TERMINAL UNIT (Continued) SOUND OUT/REGULATOR UNIT INTEGRATED CIRCUITS R3312 VRS-CY1JF105J J 1.0M 1/16W Metal Oxide R3319 VRS-CY1JF101J J 100 1/16W Metal Oxide IC1030 RH-iX2204CEZZ...
  • Page 88 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code DUNTKA214DE01 DUNTKA215FE01 SOUND OUT/REGULATOR UNIT (Continued) OUTPUT UNIT INTEGRATED CIRCUITS R7311 VRS-CY1JF103J J 10k 1/16W Metal Oxide R7312 VRS-TX2HF8R2J J 8.2 1/2W Metal Oxide IC1004 RH-iX2204CEZZ J PQ12TZ11...
  • Page 89 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code D5013 VHDMA153///-1 J Diode DUNTKA215FE01 D5014 VHDMA153///-1 J Diode OUTPUT UNIT (Continued) D5015 VHDMA153///-1 J Diode D5016 VHDMA153///-1 J Diode Q1310 VS2SC2411KR-1 J 2SC2411KR D5017 VHDHRW0702A-1 J Diode...
  • Page 90 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code C1436 VCEAPF1CW106M J 10 Electrolytic DUNTKA215FE01 C1437 VCEAPF0JW107M J 100 6.3V Electrolytic OUTPUT UNIT (Continued) C1438 VCKYCY1CF104Z J 0.1 Ceramic C1453 VCKYCY1CF104Z J 0.1 Ceramic C1215 RC-KZ0416CEZZ...
  • Page 91 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1117 VRS-CY1JF101J J 100 1/16W Metal Oxide DUNTKA215FE01 R1118 VRS-CY1JF000J 1/16W Metal Oxide OUTPUT UNIT (Continued) R1119 VRS-CY1JF000J 1/16W Metal Oxide R1120 VRS-CY1JF000J 1/16W Metal Oxide C5058 VCEAPF0JW107M J 100 6.3V Electrolytic...
  • Page 92 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1367 VRS-CY1JF272J J 2.7k 1/16W Metal Oxide DUNTKA215FE01 R1368 VRS-CY1JF222J J 2.2k 1/16W Metal Oxide OUTPUT UNIT (Continued) R1371 VRS-CY1JF222J J 2.2k 1/16W Metal Oxide R1372 VRS-CY1JF222J J 2.2k 1/16W Metal Oxide...
  • Page 93 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R1611 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide DUNTKA215FE01 R1612 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide OUTPUT UNIT (Continued) R1613 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide R1626 VRS-CY1JF103J...
  • Page 94 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R5147 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide DUNTKA215FE01 R5150 VRS-CY1JF101J J 100 1/16W Metal Oxide OUTPUT UNIT (Continued) R5151 VRS-CY1JF101J J 100 1/16W Metal Oxide R5152 VRS-CY1JF101J...
  • Page 95 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code FB1402 RBLN-0059CEZZ J Ferrite Bead DUNTKA215FE01 FB1405 RBLN-0059CEZZ J Ferrite Bead OUTPUT UNIT (Continued) FB1511 RBLN-0065CEZZ J Ferrite Bead FB5001 RBLN-0062CEZZ J Ferrite Bead R5538 VRS-CY1JF102J J 1.0k 1/16W Metal Oxide...
  • Page 96 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R6006 VRS-CY1JF101J J 100 1/16W Metal Oxide DUNTK9769DE20 R6007 VRS-CY1JF100J J 10 1/16W Metal Oxide VIDEO UNIT R6008 VRS-CY1JF123J J 12k 1/16W Metal Oxide R6011 VRS-CY1JF4R7J J 4.7...

  • Page 97: Power Unit

    PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code COILS AND TRANSFORMER RUNTK0677CEZZ L701 9FJ0L08001850 J Inductor THNW23-06251 INLET UNIT L702 9FJ0L08001025 J Inductor B-01-AT L703 9FJ0L08001025 J Inductor B-01-AT PACKAGED CIRCUIT L704 9FJ0L08001025 J Inductor B-01-AT å...
  • Page 98 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code RDENC0311CEZZ CPCi-0047CE01 POWER UNIT (Continued) PC I/F UNIT INTEGRATED CIRCUITS R731 9FJ0R91201005 J 10 1/10W Chip R732 9FJ0R32001005 J 15M 1W Metal Glaze IC8001 RH-iX3270CEZZ J HD6417709...
  • Page 99 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code C8273 9DK001-42096 J 0.01 Ceramic CPCi-0047CE01 C8281 9DK001-42096 J 0.01 Ceramic PC I/F UNIT (Continued) C8283 9DK001-42096 J 0.01 Ceramic C8284 9DK001-42096 J 0.01 Ceramic FL8056 9DK001-82026...
  • Page 100 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R8044 9DK001-51030 J 10k 1/16W Resistor Array AD CPCi-0047CE01 R8050 9DK001-51030 J 10k 1/16W Resistor Array AD PC I/F UNIT (Continued) R8051 9DK001-51030 J 10k 1/16W Resistor Array AD...
  • Page 101 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code R8606 9DK001-50163 J 68 1/16W Chip1608 CPCi-0047CE01 R8607 9DK001-50185 J 10k 1/16W Chip1608 PC I/F UNIT (Continued) R8608 9DK001-50161 J 47 1/16W Chip1608 R8609 9DK001-50161 J 47...

  • Page 102: Cabinet And Mechanical Parts

    PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code Not Available – Output Unit — CABINET AND MECHANICAL PARTS Not Available – PC I/F Unit — Not Available – PC Terminal Unit — Not Available – Video Unit —...
  • Page 103 PG-C30XU CABINET AND MECHANICAL PARTS Ref. No. Part No. Description Code Ref. No. Part No. Description Code...
  • Page 104 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code 6-68 LANGK0748CEFW J Fan Angle for PBS OPTICS MECHANISM PARTS 6-69 LANGK0751CEFW J Fan Angle A 6-70 LANGK0752CEFW J Fan Angle B 6-71 LANGK0753CEFW J Fan Angle C CCHSK0075CE41 J Optics Macha.
  • Page 105 PG-C30XU OPTICS MECHANISM PARTS Ref. No. Part No. Description Code Ref. No. Part No. Description Code...
  • Page 106 PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code POWER/BALLAST UNIT PARTS Not Available – Power/Ballast Unit Ass'y — 12-1 9FJ0N00002020 J Case Base 12-2 9FJ0N00002030 J Cover 12-3 9FJ0M41001170 J Fan 12-4 9FJ0A11901620 J Insulating Sheet...
  • Page 107 PG-C30XU POWER/BALLAST PARTS Ref. No. Part No. Description Code Ref. No. Part No. Description Code 12-2 12-11 12-14 12-14 12-5 12-14 12-14 12-3 12-12 12-10 12-8 12-10 12-9 12-13 12-4 12-7 12-6 12-1 12-7 12-6...

  • Page 108: Supplied Accessories

    PG-C30XU Ref. No. Part No. Description Code Ref. No. Part No. Description Code PACKING PARTS SUPPLIED ACCESSORIES (NOT REPLACEMENT ITEM) PFiLD0076CEZZ J Extra Air Filter SPAKC5438CEZZ – Packing Case — QACCU5013CEZZ J AC Cord SPAKP0805CEZZ – Polystyrene Cover — å...

Table of Contents