Sharp PG-C45XU Operation Manual
  1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. PG-C45XU
  6. Operation manual

Sharp PG-C45XU Operation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
The
trusted
dependable
most
,
name
projector lamp
in
sales.
http://www.myprojectorlamps.com
http://www.myprojectorlamps.ca
http://www.myprojectorlamps.eu
The following projector manual has not been modified or altered in any way.

Advertisement

Table of Contents
loading

Related Manuals for Sharp PG-C45XU

Summary of Contents for Sharp PG-C45XU

  • Page 1 trusted dependable most name projector lamp sales. http://www.myprojectorlamps.com http://www.myprojectorlamps.ca http://www.myprojectorlamps.eu The following projector manual has not been modified or altered in any way.
  • Page 2 OPERATION MANUAL MODEL PG-C45X LCD PROJECTOR...
  • Page 3 IMPORTANT For your assistance in reporting the loss or theft of your Model No.: PG-C45X Projector, please record the Serial Number located on the bottom of the projector and retain this information. Before recycling the packaging, please be sure that Serial No.: you have checked the contents of the carton thoroughly against the list of “Supplied accessories”...
  • Page 4 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 10A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
  • Page 5 The supplied CD-ROM contains operation instructions in English, German, French, Swedish, Spanish, Italian, Dutch, Portuguese, Chinese (Traditional Chinese and Simplified Chinese), Korean and Arabic. Carefully read through the operation instructions before operating the projector. Die mitgelieferte CD-ROM enthält Bedienungsanleitungen in Englisch, Deutsch, Französisch, Schwedisch, Spanisch, Italienisch, Niederländisch, Portugiesisch, Chinesisch (Traditionelles Chinesisch und einfaches Chinesisch), Koreanisch und Arabisch.
  • Page 6 2. CONSUMER PRODUCT SAFETY ACT To ensure that you will promptly receive any safety notification of inspection, modification, or recall that SHARP may be required to give under the 1972 Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT “LIMITED WARRANTY” CLAUSE.
  • Page 7 L’INTERIEUR DU BOITIER ETANT EXTREMEMENT CHAUD, ATTENDRE 1 HEURE AVANT DE PROCEDER AU REMPLACEMENT DE LA LAMPE. NE REMPLACER QUE PAR UNE LAMPE SHARP DE TYPE BQC-XGC50X//1. RAYONS ULTRAVIOLETS : PEUVENT ENDOMMAGER LES YEUX. ETEINDRE LA LAMPE AVANT DE PROCEDER A L’ENTRETIEN.

  • Page 8: Outstanding Features

    Outstanding Features 1. Ultra High Brightness from a Compact Projector • AC 250W Lamp Use AC 250W lamp for excellent color uniformity and ultra high brightness. • Power Save mode function enables lower noise levels, reduced power consumption and longer lamp life. 2.

  • Page 9: Table Of Contents

    Contents Introduction Adjusting the Picture ........46 Adjusting Image Preferences ........46 Outstanding Features ......... 3 Selecting the Signal Type ........46 Contents ............... 4 Progressive Mode ............ 47 IMPORTANT SAFEGUARDS ....... 6 Adjusting Computer Images ......48 How to Access the PDF Operation Manuals When Auto Sync is OFF ...........
  • Page 10 Connecting Pin Assignments ......88 (RS-232C) Specifications and Command Settings ........89 Wired Remote Control Terminal Specifications ..........92 Computer Compatibility Chart ......93 Troubleshooting ..........94 For SHARP Assistance ........96 Specifications ............ 97 Dimensions ............98 Glossary ............. 99 Index ..............100...

  • Page 11: Important Safeguards

    IMPORTANT SAFEGUARDS CAUTION : Please read all of these instructions before you operate this product and save these instructions for later use. Electrical energy can perform many useful functions. This product has been engineered and manufactured to assure your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS.
  • Page 12 IMPORTANT READ BEFORE USING THE PRODUCT • You have acquired a product that includes software licensed to SHARP Corporation by Lineo, Inc. (“Lineo”). The Software is protected by copyright laws, international copyright treaties, and other intellectual prop- erty laws and treaties. Lineo and its suppliers retain all ownership of, and intellectual property rights in...
  • Page 13 I For minimal servicing and to maintain high image qual- Cautions regarding the transportation of the pro- ity, SHARP recommends that this projector be installed jector in an area free from humidity, dust and cigarette smoke. I When transporting the projector, be sure not to subject...

  • Page 14: How To Access The Pdf Operation Manuals (Windows, Macintosh)

    How to Access the PDF Operation Manuals (Windows, Macintosh) PDF operation manuals in several languages are included in the CD-ROM, so that you can work with the projector, even if you do not have this manual. To utilize these manuals, you need to install Adobe Acrobat Reader on your PC (Windows or Macintosh).

  • Page 15: Part Names

    Part Names Numbers in refer to the main pages in this operation manual where the topic is explained. Projector (Front and Top View) Power (ON/OFF) INPUT button buttons For switching input mode Turn the power on or off. 1, 2, 3 or 4. Power indicator KEYSTONE button Illuminates red, when the...

  • Page 16: Projector (Rear View)

    Projector (Rear View) USB terminal AUDIO INPUT 1, 2 terminal Terminal for connecting a Shared audio input computer using a terminal for INPUT 1 USB cable. and 2. WIRED REMOTE RS-232C terminal control input For controlling terminal projector using a computer.

  • Page 17: Remote Control (Front View)

    Part Names Remote Control (Front View) KEYSTONE button Power (ON/OFF) buttons For adjusting Keystone or Digital For turning the power on or off. Shift setting. MENU button ENTER button For displaying adjustment and For setting items selected or setting screens. adjusted on the menu.

  • Page 18: Using The Remote Control

    Using the Remote Control Available Range of the Remote Control I The remote control can be used to control the projector within the ranges shown in the illustration. Note Remote • The signal from the remote control can be reflected off a screen control 30°...

  • Page 19: Accessories

    5 BNC to 15-pin D-sub cable (9'10'' (3.0 m)) AN-C3BN RS-232C serial control cable (32'10" (10.0m)) AN-C10RS • Some of the cables may not be available depending on the region. Please check with your nearest Note Sharp Authorized Projector Dealer or Service Center.

  • Page 20: Connections And Setup

    Connections and Setup...

  • Page 21: Connecting The Projector To Other Devices

    Connecting the Projector to Other Devices Before Connecting Note • Before connecting, be sure to turn off both the projector and the devices to be connected. After making all connections, turn on the projector and then the other devices. When connecting a computer, be sure that it is the last device to be turned on after all the connections are made.

  • Page 22: Connecting The Power Cord

    Supplied Power code Connecting the Power accessory Cord Plug in the supplied power cord into the AC socket on the rear of the pro- jector.

  • Page 23: Connecting The Projector To A Computer

    Type” in the “Picture” menu. See page 46. • A Macintosh adaptor may be required for use with some Macintosh computers. Con- tact your nearest Sharp Authorized Projector Dealer or Service Center. • Depending on the computer you are us-...
  • Page 24 “Plug and Play” function (when connecting to a 15-pin terminal) I This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. I Before using the “Plug and Play” function, be sure to turn on the projector first and the connected computer last.

  • Page 25: Connecting To Video Equipment

    Connecting the Projector to Other Devices Connecting to Video Equipment Connecting to Video Equipment Using an S-video, a Composite VCR or other audio-visual equipment To S-video output terminal Video or an Audio Cable To video output terminal Using an S-video, video, or audio cable, a VCR, To audio output terminal laser disc player or other audio-visual equip- ment can be connected to INPUT 3, INPUT 4...
  • Page 26 3RCA to 15-pin D-sub cable Optional Connecting to Type: AN-C3CP cable (9'10" (3.0 m)) Component Video Equipment To analog component output terminal Use a 3 RCA to 15-pin D-sub cable when con- To audio output terminal necting to the INPUT 1 or 2 terminal, compo- nent video equipment such as DVD players and DTV* decoders.

  • Page 27: Connecting To An Amplifier

    Connecting the Projector to Other Devices Connecting to an Amplifier Audio input terminal Connecting to an Amplifier or Other Audio Components Using a ø3.5 mm stereo minijack to RCA au- dio cable, an amplifier or other audio compo- nents can be connected to the AUDIO OUT- PUT terminal.

  • Page 28: Controlling The Projector By A Computer

    Controlling the Projector by a Computer Connecting to a Supplied DIN-D-sub Computer Using a DIN- RS-232C adaptor accessory D-sub RS-232C Adaptor and an RS-232C Serial Control Cable Optional RS-232C serial control cable Type: AN-C10RS (32'10" (10.0 m)) cable When the RS-232C terminal on the projector is connected to a computer with a DIN-D-sub RS-232C adaptor and an RS-232C serial con- RS-232C terminal...

  • Page 29: Connecting To A Monitor

    Connecting the Projector to Other Devices Connecting to a Monitor Supplied RGB cable Watching Images on accessory Both the Projector and a Monitor Computer RGB cable (32'10" (10.0 m)) Optional You can display computer images on both the Type: AN-C10BM AN-C10MC cable projector and a separate monitor using two...

  • Page 30: Using The Wireless Presentation Function Of The Remote Control

    Using the Wireless Presentation Function of the Remote Control The Wireless Presentation function on the projector works the same as the [Page Up] and [Page Down] keys on a computer keyboard. It can also be used to move forward or backward when viewing images of presentation software such as PowerPoint Using the Wireless Pre- Supplied...

  • Page 31: Using As A Wired Remote Control

    (rear projection, etc.), connect a ø3.5 mm minijack cable (commercially available or available as Sharp service part QCNW- 4870CEZZ) from the WIRED R/C JACK on the top of the remote control to the WIRED RE- To WIRED R/C JACK MOTE control input terminal.

  • Page 32: Setup

    Setup Using the Adjustment Feet HEIGHT ADJUST The height of the projector can be adjusted button using the adjustment feet at the front and back of the projector when the surface the projec- Adjustment foot tor is placed on is uneven or when the screen is slanted.

  • Page 33: Adjusting The Lens

    Setup Focus ring Zoom knob Adjusting the Lens The image is focused and adjusted to the desired size using the focus ring or zoom knob on the projector. The focus is adjusted by rotat- ing the focus ring. Zooming is adjusted by mov- ing the zoom knob.

  • Page 34: Setting Up The Screen

    • A polarizing screen cannot be used with this projector. An optional lens (AN-C12MZ) from Sharp is also available for specialized application. Contact your local Sharp Authorized Projector Dealer for details on the lens. (Refer to the lens installation manual when attaching a lens.) Throw Distance I The graph below is for 100 inches (254 cm) screen with 4:3 normal mode.

  • Page 35: Screen Size And Projection Distance

    Setup Screen Size and Projection Distance Base line: Horizontal line passing through Screen the lens center Lens center L:Projection distance Standard Lens Throw ratio 1:1.77 to 2.25 NORMAL Mode (4:3) Picture (Screen) size Projection distance (L) Distance from the lens center to the bottom of the image (H) Diag.
  • Page 36 AN-C12MZ Throw ratio 1:1.18 to 1.48 NORMAL Mode (4:3) Picture (Screen) size Projection distance (L) Distance from the lens center to the bottom of the image (H) Diag. (X) Width Height Maximum (L1) Minimum (L2) The formula for picture size and 300"...

  • Page 37: Projecting A Reversed/Inverted Image

    The image is reversed. Ceiling-mount setup When using the default setting. I It is recommended that you use the optional Sharp ceiling-mount MOn-screen Display bracket for this installation. Before mounting the projector, contact your nearest Sharp Authorized Projector Dealer or Service Center to obtain the recommended ceiling-mount bracket (sold separately.) (AN-...

  • Page 38: Basic Operation

    Basic Operation...

  • Page 39: Image Projection

    Image Projection Basic Procedure Power indicator Connect the required external equipment to the pro- jector before operating the following procedures. Lamp replacement Info indicator • The language preset at the factory is English. If you want to change the on-screen display to another language, reset the language ac- cording to the procedure on page 36.
  • Page 40 "On-screen Display (Example) Press INPUT 1 mode the remote control to select the INPUT mode. Using RGB • After pressing once on the projector, to select the desired input mode. Using Note Component •When no signal is received, “NO SIGNAL.”will be displayed. When a INPUT 2 mode signal that the projector is not pre- set to receive is received, “NOT...

  • Page 41: Selecting The On-Screen Display Language

    Image Projection Press to temporarily turn off the sound. Note • Pressing again will turn the Power (OFF) sound back on. button Power (ON) ENTER button button Press , then press again MENU button while the confirmation message is displayed, to turn off the pro- ', ", \, | jector.
  • Page 42 Press ' or " to select the de- sired language, and then press Press • The desired language will be set as the on-screen display.

  • Page 43: Correcting Trapezoidal Distortion (Keystone Correction)

    Correcting Trapezoidal Distortion (Keystone Correction) Correcting Trapezoidal KEYSTONE button Distortion ENTER button ', ", \, | UNDO button This function allows for Keystone (On-screen buttons Trapezoidal Distortion) Correction. Note • When the image is projected either from top or from bottom towards the screen at an angle, the image becomes distorted trapezoidally.
  • Page 44 For easier viewing, this function shifts the entire image projected on Digital Shift Setting the screen up or down when projecting 16:9 images from DVD players and DTV* decoders. * DTV is the umbrella term used to describe the new digital television system in the United States.

  • Page 45: Menu Bar Items

    • Only when the signal type is set as “Component”, in the “Picture” menu of INPUT 1 or 2 “Color”, “Tint” and “Sharp” are displayed. • Some items cannot be reset, even when “All Reset” in Options (2) has been selected. For details see page 77.
  • Page 46 Page –30 Bright PRJ Mode Front Ceiling + Front Color –30 Rear Ceiling + Rear –30 Tint Normal Keylock Level Sharp –30 Level A –30 Level B Blue –30 RS-232C 9600 bps 38400 bps –3 CLR Temp 115200 bps Reset...

  • Page 47: Using The Menu Screen

    Using the Menu Screen This projector has two sets of menu screens that allow you to adjust the image and various projector settings. You can operate the menus from the projector or remote control using the following proce- dure. Menu screen for INPUT 1 Menu screen for INPUT 3 or INPUT 2 RGB mode or INPUT 4 Mode...
  • Page 48 Press \ \ \ \ \ or | | | | | to select the menu you want to adjust. Note • For details on the menus, see the tree charts on pages and 41. ' ' or " " " "...

  • Page 49: Menu Selections (Settings)

    Using the Menu Screen Menu Selections ENTER button (Settings) ' ' , " " " " " , \ \ \ \ \ , | | | | | Press buttons • The menu screen is displayed. MENU button Note •...
  • Page 50 Press | | | | | . • The cursor shifts to the sub menu. Sub menu ' ' or " " " " " to select the set- Press ' ting of the item displayed in the sub menu. Press •...

  • Page 51: Adjusting The Picture

    Adjust the “Picture” menu on the menu screen. ➝For operating the menu screen, see pages 42 to Note • “Color”, “Tint” and “Sharp” are not displayed when selecting INPUT 1 or 2 and the “Sig- nal Type” is “RGB” . • The picture adjustments can be stored separately in each input mode.

  • Page 52: Progressive Mode

    Progressive Mode This function allows you to select the progres- sive display of a video signal. The progres- sive display projects a smoother video image. Select “Progressive Mode” in the “Pic- ture” menu on the menu screen. ➝For operating the menu screen, see pages 42 to Note...

  • Page 53: Adjusting Computer Images

    Adjusting Computer Images Use the Fine Sync function in case of irregularities such as vertical stripes or flickering in portions of the screen. Selected Item Description Clock Adjusts vertical noise. Phase Adjusts horizontal noise (similar to tracking on your VCR). H-Pos Centers the on-screen image by moving it to the left or right.

  • Page 54: Selecting Adjustment Settings

    Selecting Adjustment Settings Adjustment settings stored in the projector can be easily accessed. Select “Select Setting” in the “Fine Sync” menu on the menu screen. ➝ For operating the menu screen, see pages 42 to Note • If a memory position has not been set, a resolution and frequency setting will not be displayed.

  • Page 55: Auto Sync Adjustment

    Adjusting Computer Images Auto Sync Adjustment Used to automatically adjust a computer image. Select “Auto Sync” in the “Fine Sync” menu on the menu screen. ➝ For operating the menu screen, see pages 42 to Note When setting to “ Normal”...

  • Page 56: Easy To Use Functions

    Easy to Use Functions...

  • Page 57: Selecting The Picture Display Mode

    Selecting the Picture Display Mode This function allows you to modify or customize the picture display mode to enhance the input image. Depending on the input signal, you can choose “NORMAL”, “FULL”, “DOT BY DOT”, “BORDER”, “STRETCH” or “SMART STRETCH” image. Switching the Picture Display Using Different Input Signals...
  • Page 58 VIDEO NORMAL FULL BORDER STRETCH SMART STRETCH 480I, 480P, 580I, 580P, 4:3 aspect ratio. 1024 × 768 768 × 576* 1024 × 576* — NTSC, PAL, SECAM Letter box, squeeze 1024 × 576* 1024 × 768 540P 16:9 aspect ratio —...

  • Page 59: Displaying A Still Image

    Displaying a Still Image This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. Freezing a Moving Image Press...

  • Page 60: Enlarging A Specific Portion Of An Image

    Enlarging a Specific Portion of an Image This function allows you to enlarge a specific portion of an image. This is useful when you want to display a detailed portion of the image. Displaying an Enlarged Portion of an Image Press •...

  • Page 61: Gamma Correction Function

    Brightens darker portions of image for more enhanced presentations. CINEMA Gives greater depth to darker portions of image for a more exciting theater experience. CUSTOM Allows you to adjust gamma value using Sharp Advanced Presentation Software. Adjusting Gamma Correction Press UNDO button •...

  • Page 62: Displaying Dual Pictures (Pict In Pict)

    Displaying Dual Pictures (Pict in Pict) Picture in Picture function allows you to display two pictures on the same screen. You can display the image input from INPUT 3 or 4 as an inset picture overlapping the main picture from INPUT 1 or 2. Displaying the Inset Picture UNDO button Press...

  • Page 63: Black Screen Function

    Black Screen Function This function can be used to display a black screen. Blacking out the Pro- jected Image Press BLACK SCREEN • The screen turns black and “BLACK button SCREEN” is displayed on the screen. To return to the original projected image, press again.

  • Page 64: Displaying The Break Timer

    Displaying the Break Timer This function can be used to show the remaining time for break during meeting. Displaying and Setting the Break Timer " buttons Press . The break timer starts to count down from 5 minutes. BREAK TIMER button When “...

  • Page 65: Color Management System (C. M. S.)

    Selected item Description function, visit “http://www.srgb.com/”. • “sRGB” cannot be selected for “Color Se- Standard Sharp default setting “Lightness”, “Chroma” and “Hue” can Custom 1-3 lected” on the C.M.S. menu when “Com- be adjusted for each of the six colors.

  • Page 66: Setting The Brightness Of The Target Color

    Setting the Brightness of the Target Color Select “Lightness” in the “C.M.S.” menu on the menu screen. ➝ For operating the menu screen, see pages 42 to Setting the Chromatic Value of the Target Color Select “Chroma” in the “C.M.S.” menu on the menu screen.

  • Page 67: Resetting User-Defined Color Settings

    Color Management System (C.M.S.) Resetting User-Defined Color Settings Select “Reset (This Color)” or “Reset (All Colors)” in the “C.M.S.” menu on the menu screen. ➝ For operating the menu screen, see pages 42 to Selected item Description Reset “Lightness”, “Chroma” and “Hue” of the (This Color) color selected for “Target”...

  • Page 68: Setting The Audio Output Type

    Setting the Audio Output Type This function allows you to set the audio output type. Selected Item Description Audio output that does not vary in strength with the volume level of the (Fixed audio output) source projector. Audio output that varies in strength with the volume level of the source projector.

  • Page 69: Auto Search Function

    Auto Search Function This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed. Using Auto Search Select “Auto Search” in the “Options (1)”...

  • Page 70: Video Digital Noise Reduction (Dnr) System

    Video Digital Noise Reduction (DNR) System Digital Noise Reduction (DNR) provides high quality images with minimal dot crawl and cross color noise. Reducing Image Noise Select “DNR” in the “Options (1)” menu on the menu screen. ➝ For operating the menu screen, see pages 42 to Note...

  • Page 71: Setting The Video System

    Setting the Video System The video input system mode is preset to “Auto”; however, a clear picture from the con- nected audio-visual equipment may not be received, depending on the video signal differ- ence. In that case, switch the video signal. Setting the Video System Select “Video System”...

  • Page 72: Saving Projected Images

    Saving Projected Images • This projector allows you to capture projected images (RGB signals) and set them as a startup image, or background image when no signals are being received. • You can capture the images that are input using RGB signals. Capturing the Image Select “Image Capture”...

  • Page 73: Setting A Background Image

    Setting a Background Image This function allows you to select the image displayed when no signal is being sent to the projector. Selected Item Description Sharp SHARP default image Custom User customized image (e.g. company logo) Blue Blue screen None Black screen *1 You can set a captured image as a background image by selecting “Custom”.

  • Page 74: Selecting The Economy Mode

    ➝ For operating the menu screen, see pages 42 to Monitor Out/RS-232C connection is set to “ON”. Monitor Out/RS-232C connection is set to “OFF”. Note • Set “Mntr.out/RS232” to “ON” when using the Sharp Advanced Presentation Software.

  • Page 75: Automatic Power Off Function

    1,500 hours 100 hours For lamp replacement, contact your (Standard mode) nearest Sharp Authorized Projector Dealer or Service Center. • The table at the right indicates rough esti- mates in the case of using only in each mode shown. Remaining lamp life changes within the range of the values shown depending on the frequency at which “Power Save”...

  • Page 76: Reversing/Inverting Projected Images

    Reversing/Inverting Projected Images This projector is equipped with a reverse/invert image function that allows you to reverse or invert the projected image for various applications. Selected Item Description Front Normal image Ceiling + Front Inverted image Rear Reversed image Ceiling + Rear Reversed and inverted image Setting the Projection Mode...

  • Page 77: Canceling The Keylock Setting

    Locking the Operation Buttons on the Projector Canceling the Keylock Setting When the Keylock Level is set to “Normal”, all buttons are functional. Select “Keylock Level” in the “Options (2)” menu on the menu screen and set “ Normal”. ➝ For operating the menu screen, see pages 42 to Note...

  • Page 78: Setting Up A Password

    Setting up a Password A password can be set by the user to prevent adjustments to certain settings on the “Options (2)” menu. Using a password together with the Keylock Level (page 71) is more effective. Entering the Password Select “Password” in the “Options (2)” menu on the menu screen.

  • Page 79: Changing The Password

    Setting up a Password Changing the Password Select “Password” in the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 42 to Press ' ' ' , " " " " " and | | | | | to enter the password in “Old Password”...

  • Page 80: Setting The Anti-Theft

    If you lose or forget your keycode, you will need to contact your nearest Sharp Authorized Projector Dealer or Ser- vice Center (see page 96). You may need to bring your projector to them to restore the projector to original factory condition (password and keycode reset).

  • Page 81: Changing The Keycode

    Setting the Anti-Theft Enter the remaining 3 digits by pressing any buttons you like. Enter the same keycode once more in “Reconfirm”. Note • The Keylock function will become temporarily disabled. When “Anti-Theft” is set, the keycode inputting box appears after the power is turned on.

  • Page 82: Initializing The Settings

    Initializing the Settings This function allows you to initialize the settings you have made in the projector. Returning to the Default Settings Select “All Reset” in the “Options (2)” menu on the menu screen. ➝ For operating the menu screen, see pages 42 to Note...

  • Page 83: Displaying The Adjustment Settings

    Displaying the Adjustment Settings This function can be used to display all the adjusted settings as a list on the screen. Overview of All Menu Settings Select the “Status” menu on the menu screen and press ➝ For operating the menu screen, see pages 42 to...

  • Page 84: Appendix

    Appendix...

  • Page 85: Maintenance

    Maintenance Cleaning the projector Cleaning the lens I Be sure to unplug the power cord before clean- I Use a commercially available blower or lens ing the projector. cleaning paper (for glasses and camera lenses) I The cabinet as well as the operation panel is for cleaning the lens.

  • Page 86: Replacing The Air Filter

    • The air filters should be cleaned ev- ery 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. • Ask your nearest Sharp Authorized Air filter Air filter Projector Dealer or Service Center to...
  • Page 87 Replacing the Air Filter Clean the air filter. • Clean the dust off the air filter and cover with a vacuum cleaner extension hose. Replace the air filter. • Place the air filter underneath the tabs on the filter cover. Replace the filter cover.

  • Page 88: Maintenance Indicators

    • Cooling fan break- • Take the projector to your nearest temperature is warning Red on/ down Sharp Authorized Projector Dealer abnormally high. indicator Power off • Internal circuit failure or Service Center (see page 96) • Clogged air intake for repair.
  • Page 89 Maintenance Indicators Info • If the temperature warning indicator illuminates, and the power turns off, follow the above possible solutions and then wait until the projector has cooled down completely before plugging in the power cord and turning the power back on. (At least 5 minutes.) •...

  • Page 90: Regarding The Lamp

    • Wait at least one hour after the power cord is disconnected to allow the surface of the lamp unit to fully cool before removing the lamp unit. I If the new lamp does not light after replacement, take your projector to the nearest Sharp Autho- rized Projector Dealer or Service Center for repair. Purchase a replacement lamp unit of type BQC- XGC50X//1 from your nearest Sharp Authorized Projector Dealer or Service Center.

  • Page 91: Removing And Installing The Lamp Unit

    Regarding the Lamp Removing and Install- ing the Lamp Unit Lamp Info BQC-XGC50X//1 unit • Be sure to remove the lamp unit by the handle. Be sure not to touch the glass surface of the lamp unit or the inside of the projector.

  • Page 92: Resetting The Lamp Timer

    Remove the lamp unit. • Loosen the securing screws from the lamp unit. Hold the lamp unit by the handle and pull it in the direction of the arrow. Securing Insert the new lamp unit. screw • Press the lamp unit firmly into the lamp unit compartment.

  • Page 93: Connecting Pin Assignments

    Connecting Pin Assignments INPUT 1/2 RGB and OUTPUT Signal Terminal: 15-pin Mini D-sub female connector RGB Input Component Input 1. Video input (red) 1. P 2. Video input (green/sync on green) 2. Y 3. Video input (blue) 3. P 4. Reserve input 1 4.

  • Page 94: (Rs-232C) Specifications And Command Settings

    (RS-232C) Specifications and Command Settings PC control A computer can be used to control the projector by connecting an RS-232C serial control cable (cross type, sold separately) to the projector. (See page for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard.
  • Page 95 INPUT 3 TINT (–30 - +30) OK OR ERR INPUT 1 RESIZE : STRETCH OK OR ERR INPUT 3 SHARP (–30 - +30) OK OR ERR INPUT 1 RESIZE : SMART STRETCH OK OR ERR INPUT 3 CLR TEMP (–3 - +3)
  • Page 96 OK OR ERR BACKGROUND SELECTION : BLUE OK OR ERR BACKGROUND SELECTION : NONE OK OR ERR STARTUP IMAGE SELECTION : SHARP OK OR ERR STARTUP IMAGE SELECTION : CUSTOM OK OR ERR STARTUP IMAGE SELECTION : NONE OK OR ERR...

  • Page 97: Wired Remote Control Terminal Specifications

    Data Code • System codes C1 to C5 are fixed at “10110”. • Codes C14 and C15 are reverse confirmation bits, with “10” indicating “Front” and “01” indicating “Rear”. Sharp remote control signal format Transmission format: 15-bit format 67.5 ms 67.5 ms...

  • Page 98: Computer Compatibility Chart

    Computer Compatibility Chart Computer • Multiple signal support Horizontal Frequency: 15–126 kHz Vertical Frequency: 43–200 Hz*, Pixel Clock: 12–230 MHz • Compatible with sync on green and composite sync signals • UXGA and SXGA compatible in advanced intelligent compression • AICS (Advanced Intelligent Compression and Expansion System) resizing technology The following is a list of modes that conform to VESA.

  • Page 99: Troubleshooting

    Troubleshooting Problem Check Page • Projector power cord is not plugged into the wall outlet. • Power to the external connected devices is off. — • The selected input mode is wrong. • Cables incorrectly connected to rear panel of the projector. •...
  • Page 100 Troubleshooting Problem Check Page • The signal in INPUT 1 or 2 is set to a resolution that exceeds SXGA. • The signal in INPUT 1 or 2 is sending Component signals 480I, Pict in Pict does not work. 480P, 540P, 580I, 580P, 720P, 1035I or 1080I. •...

  • Page 101: For Sharp Assistance

    If you encounter any problems during setup or operation of this projector, first refer to the “Troubleshooting” section on pages and 95. If this operation manual does not answer your question, please contact the SHARP Service departments listed below. U.S.A. Sharp Electronics Corporation...

  • Page 102: Specifications

    USB cable (9'10", 3 m), Computer audio cable (9'10", 3 m), DIN-D-sub RS-232C adap- tor (6 ⁄ ", 15 cm), Extra air filter, Lens cap (attached), Projector manual and technical reference CD-ROM, Sharp Advanced Presentation Software CD-ROM, Operation manual, Quick reference label Replacement parts Lamp unit (Lamp/cage module) (BQC-XGC50X//1), Remote control (RRMCGA029WJSA), Two R-6 batteries (“AA”...

  • Page 103: Dimensions

    Dimensions Units: inches (mm) Rear View Side View Top View Side View (1.5) (390) (1.5) 5 (126.5) Front View ø 67.5 (80) (241.5) (100.5) (111.75) (75) (67.5) Bottom View...

  • Page 104: Glossary

    Glossary Advanced intelligent compression Keystone correction High quality resizing of lower and higher resolu- Function to digitally correct a distorted image tion images to fit the projector’s native resolution. when the projector is set up at an angle, smooth- ens out jaggies on keystone images and com- Anti-theft presses the image not only horizontally but verti- If the “Keycode”...

  • Page 105: Index

    Index 2D Progressive ............ 47 GAMMA button ............ 56 3D Progressive ............ 47 HEIGHT ADJUST button ........27 AC socket ............. 17 Hue ..............61 Adjusting Computer Images ........ 48 Image Capture ............. 67 Adjusting the Lens ..........28 INPUT 1 terminal ..........18 Adjusting the Picture ..........
  • Page 106 Save Setting ............48 Select Setting ............49 Selecting the on-screen display language ..36 Signal Info ............49 Signal Type ............46 SMART STRETCH ..........53 Speaker ..............63 Special Modes ............. 49 sRGB ..............60 Startup image ............68 Status ..............
  • Page 107 SHARP CORPORATION...

This manual is also suitable for:

Pg-c45x

Table of Contents