Using The Gui (Graphical User Interface) Menu Screens - Sharp Notevision PG-C20XA Operation Manual

Using the
This projector has three sets of menu screens (INPUT 1 (RGB), INPUT 1 (COMPONENT) and INPUT 2 (S-VIDEO)
or 3 (VIDEO)) that allow you to adjust the image and various projector settings. These menu screens can be
operated from the projector or the remote control with the following buttons.
Projector
ON/OFF
POWER
KEYSTONE
INPUT
BACK
INPUT 1 (RGB) mode
1
INPUT 1 (COMPONENT) mode
1
INPUT 2 (S-VIDEO) or 3 (VIDEO) mode
1
1 Press MENU to display the main menu.
2 Press ∂/ƒ to select an adjustment item in the main menu.
3 Press ENTER to display the sub menu.
4 Press ∂/ƒ to select an adjustment item in the sub menu.
5 Press ENTER to activate the selected adjustment item.
6 Press ∂/ƒ to adjust the item.
7 Press BACK to return to the previous screen.
8 Press MENU to exit from the GUI.
• For details on items on the menu screen, see the tree charts on pages 24 and 25.
23
GUI (Graphical User Interface) Menu Screens
LAMP
2, 4, 6
TEMP.
3, 5
AUTO SYNC
1, 8
ENTER MENU
(GUI) On-screen Display
Remote control
7
4
4
4