1. Manuals
  2. Brands
  3. Sharp Manuals
  4. Projector
  5. PG-C30XE - Notevision XGA LCD Projector
  6. Operation manual

Sharp Notevision PG-C30XE Operation Manual

Lcd projector
Hide thumbs Also See for Notevision PG-C30XE:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Service Manual
OPERATION MANUAL
MODEL
PG - C30XE
LCD PROJECTOR

Advertisement

Table of Contents
loading

Related Manuals for Sharp Notevision PG-C30XE

Summary of Contents for Sharp Notevision PG-C30XE

  • Page 1 OPERATION MANUAL MODEL PG - C30XE LCD PROJECTOR...
  • Page 2 This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC. Dieses Gerät entspricht den Anforderungen der EG-Richtlinien 89/336/ EWG und 73/23/EWG mit Änderung 93/68/EWG. Ce matériel répond aux exigences contenues dans les directives 89/ 336/CEE et 73/23/CEE modifiées par la directive 93/68/CEE. Dit apparaat voldoet aan de eisen van de richtlijnen 89/336/EEG en 73/ 23/EEG, gewijzigd door 93/68/EEG.
  • Page 3 SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
  • Page 4 Before using the LCD projector, please read this operation manual carefully. OPERATION MANUAL ENGLISH IMPORTANT For your assistance in reporting the loss or theft of your Model No.: PG - C30XE Colour LCD Projector, please record the Serial Number located on the bottom of the projector and retain this Serial No.: information.

  • Page 5: Important Safeguards

    Important Safeguards ATTENTION: Please read all of these instructions before you operate your LCD Projector for the first time. Save these instructions for future reference. For your own protection and prolonged operation of your LCD Projector, be sure to read the following “Important Safeguards”...

  • Page 6: Outstanding Features

    Outstanding Features 1. ADVANCED COMPATIBILITY WITH HIGH-END WORKSTATIONS AND PCS Compatible with up to 200 Hz vertical refresh rate, Sync on Green and Composite Sync signals for use with a wide variety of high-end PCs and Workstations. (Page 11) 2. FOR USE WITH DTV* Allows projection of DTV images and 16:9 wide-screen images when connected to a DTV decoder or similar video systems.

  • Page 7: Table Of Contents

    Contents Important Information Useful Features Important Safeguards …………………………… Freeze Function …………………………………… 33 Outstanding Features …………………………… Digital Image Magnification …………………… 34 Contents …………………………………………… Gamma Correction ……………………………… 35 Usage Guidelines ………………………………… Selecting the Picture Display Mode …………… 36 How to Access the PDF Operation Manuals Black Screen Function ……………………………...

  • Page 8: Usage Guidelines

    Laser pointer window Caution Concerning the Lamp Unit Potential hazard of glass particles if lamp ruptures. Please have Sharp Authorised LCD Projector Dealer or Service Centre replace lamp if rupture occurs. CAUTION LAMP MAY RUPTURE.

  • Page 9: (For Windows And Macintosh)

    Double click on the “saps” pdf file to access the Double click on the “saps” pdf file to access the Sharp Advanced Presentation Software manual. 7 Double click on the pdf file. Sharp Advanced Presentation Software manual. 8 Double click on the pdf file.

  • Page 10: Part Names

    Part Names Numbers next to the part names refer to the main pages in this manual where the topic is explained. Projector LAMP REPLACEMENT MUTE button indicator TEMPERATURE WARNING POWER indicator indicator VOLUME buttons ( / ) POWER buttons (ON/OFF) MENU button KEYSTONE button AUTO SYNC button...

  • Page 11: Inserting The Batteries

    Part Names Remote Control Front View Rear View MUTE button POWER buttons VOLUME buttons (ON/OFF) ( / ) LEFT-CLICK button KEYSTONE/BLACK LASER POINTER/ SCREEN button MENU button MOUSE/ RIGHT-CLICK/ ADJUSTMENT ENTER button buttons (∂/ƒ/ß/©) UNDO button INPUT button AUTO SYNC button FREEZE button RESIZE button ENLARGE button...

  • Page 12: Setup & Connections

    Setup & Connections...

  • Page 13: Supplied Accessories

    Computer audio cable DIN-D-sub RS-232C cable Computer RGB cable Remote mouse receiver USB mouse control cable PS/2 mouse control cable Extra air filter Lens cap CD-ROM LCD projector quick references LCD projector operation manual Sharp Advanced Presentation Software operation manual...

  • Page 14: Connecting The Projector

    When connecting this projector to a computer, select “Computer/RGB” for “Signal Type” on the GUI menu. (See page 27.) • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorised LCD Projector Dealer or Service Centre.

  • Page 15: Connecting The Projector To Video Equipment

    Connecting the Projector Connecting other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA/UXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information. When connecting this projector to a computer, select “Computer/RGB” for “Signal Type” on the GUI menu. (See page 27.) •...
  • Page 16 Connecting the Projector To a DTV decoder or DVD player 1 Connect one end of the HD-15-RGB cable to the INPUT 1 or 2 port on the projector. 2 Connect the other end to the corresponding terminals on the video source. 3 To use the built-in audio system, connect one end of the audio cable (sold separately) to AUDIO INPUT terminal for INPUT 1, 2 on the projector.

  • Page 17: Connecting Rs-232C Port

    • The arrows (→, ↔) indicate the direction of the signals. • A Macintosh adaptor may be required for use with some Macintosh computers. Contact your nearest Sharp Authorised LCD Projector Dealer or Service Centre.

  • Page 18: Connecting The Remote Mouse Receiver

    Connecting the Projector Connecting the Remote Mouse Receiver You can use the remote control as a remote mouse. Connecting to the USB port on a PC or Macintosh 1 Connect one end of the supplied USB mouse control cable to the corresponding terminal on the computer. 2 Connect the other end to the USB port on the remote mouse receiver.

  • Page 19: Operation

    Operation Basic Operations 1 Make the necessary connections before pro- ceeding. Connect the power cord to a wall outlet. The POWER indicator lights up red and the projector enters standby mode. • If the bottom filter cover is not securely installed, the POWER indicator flashes.
  • Page 20 Basic Operations 3 Slide the zoom knob. The image can be adjusted to the desired size within the zoom range. 4 Slide the focus knob until the image on the screen becomes clear. 5 Press INPUT to select the desired input mode. EXAMPLE Press INPUT again to change the mode.

  • Page 21: Setting Up The Screen

    Setting up the Screen Position the projector perpendicular to the screen with all feet flat and level to achieve an optimal image. Move the projector forward or backward if the edges of the image are distorted. • The projector lens should be centred in the middle of the screen. If the lens centre is not perpendicular to the screen, the image will be distorted, making viewing difficult.

  • Page 22: Reversed Image Setup

    • When using a mirror, be sure to carefully position both the projector and the mirror so the light does not shine into the eyes of the audience. Ceiling-mount Setup • It is recommended that you use the optional Sharp ceiling- mount bracket for this installation. • Before mounting the projector, contact your nearest Sharp Authorised LCD Projector Dealer or Service Centre to obtain the recommended ceiling-mount bracket (sold separately).
  • Page 23 Setting up the Screen Digital Image Adjustments Projector Remote control Digital Keystone Correction When the image is distorted due to the projection angle, 1, 4a the Digital Keystone Correction function allows you to correct it. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ.

  • Page 24: Operating The Wireless Mouse From The Remote Control

    Operating the Wireless Mouse from the Remote Control Using the Remote Control as a Wireless Mouse The remote control has the following three functions: MOUSE/ADJUSTMENT switch • Projector control (Remote control) • Wireless mouse • Laser pointer MOUSE ADJ. MOUSE ADJ.
  • Page 25 Operating the Wireless Mouse from the Remote Control Effective buttons in MOUSE mode Use as a Wireless Mouse Be sure the supplied remote mouse receiver is Remote control connected to your computer. (Front view) (Slide the MOUSE/ADJUSTMENT switch on LASER POINTER MOUSE ADJ.

  • Page 26: Using The Gui (Graphical User Interface) Menu Screens

    Using the (Graphical User Interface) Menu Screens Projector Remote control This projector has two sets of menu screens (INPUT 1 or 2 and INPUT 3) that allow you to adjust the image and various projector settings. These menu screens can be operated from the projector or the remote control with the following buttons.

  • Page 27: Main Menu

    Items on the INPUT 3 (VIDEO) Mode Menu Bar Main menu Main menu Picture Contrast Picture Contrast Bright Bright Color Color Tint Tint Sharp Computer/RGB Blue Component CLR Temp Blue Reset Interlaced CLR Temp Signal Type Progressive Reset Interlaced I/P Conversion...

  • Page 28: Selecting The On-Screen Display Language

    Selecting the On-screen Display Language Projector Remote control English is the preset language for the On-screen Display. The language can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ.

  • Page 29: Picture Adjustments

    (GUI) On-screen Display (COMPUTER/RGB input in INPUT 1 or 2 mode) • “Color”, “Tint” and “Sharp” do not appear for COMPUTER/ RGB input in INPUT 1 or 2 mode. • “Sharp” does not appear for COMPONENT input in INPUT 1 or 2 mode.

  • Page 30: Adjusting The Colour Temperature

    Picture Adjustments Projector Remote control Adjusting the Colour Temperature This function can be used to adjust the colour temperature to suit the type of image input to the projector (video, computer image, TV broadcast, etc.). Decrease the colour temperature to create warmer, reddish images for natural flesh tones.

  • Page 31: I/P Conversion

    Picture Adjustments Projector Remote control I/P Conversion This function allows you to select either an interlaced display or a progressive display of a video signal. The progressive display projects a smoother video image. (Slide the MOUSE/ADJUSTMENT switch 1, 6 MOUSE ADJ.

  • Page 32: Computer Image Adjustments (Input 1 Or 2 Mode Only)

    Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control Adjusting the Computer Image When displaying computer patterns which are very detailed (tiling, vertical stripes, etc.), interference may occur between the LCD pixels, causing flickering, vertical stripes, or contrast irregularities in portions of the screen.

  • Page 33: Saving And Selecting Adjustment Settings

    Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control Saving and Selecting Adjustment Settings This projector allows you to store up to seven adjustment settings for use with various computers. Once these settings are stored, they can be easily selected each time you connect a computer to the projector.

  • Page 34: Special Mode Adjustment

    Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control Special Mode Adjustment Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in “Special Modes” on the “Fine Sync” menu screen may need to be selected to match the computer display 1, 6 mode.

  • Page 35: Auto Sync Adjustment

    Computer Image Adjustments (INPUT 1 or 2 mode Only) Projector Remote control Auto Sync Adjustment • Used to automatically adjust a computer image. • Auto Sync adjustment can be made manually by pressing AUTO SYNC, or automatically by setting “Auto Sync” to “ON” in the projector’s GUI menu. 1, 5 When “Auto Sync”...

  • Page 36: Useful Features

    Useful Features Freeze Function Projector Remote control This function allows you to instantly freeze a moving image. This is useful when you want to display a still image from a computer or video, giving you more time to explain the image to the audience. You can also use this function to display a still image from a computer while you make preparations for the next computer images to be presented.

  • Page 37: Digital Image Magnification

    Digital Image Magnification Projector Remote control This function allows you to magnify a specific portion of an image. This is useful when you want to display a detailed portion of the image. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ.) 1 Press ENLARGE.

  • Page 38: Gamma Correction

    Brightens darker portions of image for more enhanced presentations. GAMMA 2 Gives greater depth to darker portions of image for a more exciting theatre experience. CUSTOM Allows you to adjust gamma value using Sharp Advanced Presentation Software. (Slide the MOUSE/ADJUSTMENT switch GAMMA 1 MOUSE ADJ.

  • Page 39: Selecting The Picture Display Mode

    Selecting the Picture Display Mode Projector Remote control This function allows you to modify or customise the picture display mode to enhance the input image. Depending on the input signal, you can choose NORMAL, FIT TO SCREEN, DOT BY DOT, WIDE or NORMAL (WIDE) image.

  • Page 40: Black Screen Function

    Black Screen Function Projector Remote control This function can be used to superimpose a black screen over the projected image. Blacking out the Projected Image BLACK SCREEN Press BLACK SCREEN. The screen turns black and button “BLACK SCREEN” is displayed on the screen. To return 1, 5 to the original projected image, press BLACK SCREEN again.

  • Page 41: Selecting A Background Image

    (i.e. your company logo) as the startup image. The custom image must be a 256-colour BMP file with a picture size no larger than 1,024 768 pixels. Please see the Sharp Advanced Presentation Software operation manual for how to save (or change) a custom image.

  • Page 42: Economy Mode

    Economy Mode These functions allow you to reduce the power consumption when the projector is in standby mode. Automatic Power Shutoff Function On-screen Display When no input signal is detected for more than 15 minutes, the projector will automatically shut off. The on-screen message on the left will appear five minutes before the power is automatically turned off.

  • Page 43: Password

    Password Projector Remote control A password can be set by the user and used with the keylock level to prevent adjustments to certain settings on the GUI. Setting the Password 1, 6 (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 2, 3, 4, 5 1 Press MENU.

  • Page 44: Selecting The Keylock Level

    Selecting the Keylock Level Projector Remote control This function can be used to lock the use of certain operation buttons on the projector. The user can still operate the projector fully with the remote control. Description of Keylock Levels Selected item Description 1, 5 Normal...

  • Page 45: Reverse/Invert Image Function

    Reverse/Invert Image Function Projector Remote control This projector is equipped with a reverse/invert image function which allows you to reverse or invert the pro- jected image for various applications. Description of Projected Images 1, 5 Selected item Projected image Front Normal image 2, 3 Ceiling Front...

  • Page 46: Using The Presentation Tools

    3 Press ENTER to start counting down the break 1, 5 time. 4 Press ∂ to increase or ƒ to decrease the break When selecting Sharp default image time. 5 Press TOOLS to return to normal screen. • The break time is displayed against the background image...

  • Page 47: Status Function

    Status Function Projector Remote control This function can be used to display all the adjusted settings on the screen simultaneously. (Slide the MOUSE/ADJUSTMENT switch MOUSE ADJ. on the remote control to the ADJ. position.) 1 Press MENU. 1, 4 2 Press ß/© to select “Status”. 3 Press ENTER to display all the adjustment settings.

  • Page 48: Maintenance & Troubleshooting

    Maintenance & Troubleshooting...

  • Page 49: Air Filter Maintenance

    • The air filters should be cleaned every 100 hours of use. Clean the filters more often when the projector is used in a dusty or smoky location. • Have your nearest Sharp Authorised LCD Projector Dealer or Service Centre exchange the filter (PFILD0076CEZZ) when it is no longer possible to clean it.

  • Page 50: Lamp/Maintenance Indicators

    • Clogged air filter. • Clean the filter. (See page 46.) • Cooling fan breakdown. • Take the projector to your nearest Sharp • Internal circuit failure. Authorised LCD Projector Dealer or Service Centre for repair. • Burnt-out lamp.

  • Page 51: Replacing The Projection Lamp

    Carefully change the lamp by following the steps below. If the new lamp does not light after replacement, take your projector to the nearest Sharp Authorised LCD Projector Dealer or Service Centre for repair. Purchase a replacement lamp unit (lamp/cage module) of the current type BQC-PGC30XE/1 from your nearest Sharp Authorised LCD Projector Dealer or Service Centre.

  • Page 52: Using The Kensington Lock

    Replacing the Projection Lamp Resetting the lamp timer Connect the power Reset the lamp timer. cord. Plug the power cord into the AC While pressing ƒ, © and “LAMP 0000H” is displayed, socket of the projector. ENTER on the projector, press indicating that the lamp timer is POWER ON on the projector.

  • Page 53: Appendix

    Appendix Transporting the Projector Using the Carrying Handle When transporting the projector, carry it by the carrying handle on the side. CAUTION • Always put on the lens cap to prevent damage to the lens when transporting the projector. • Do not lift or carry the projector by the lens or the lens cap Carrying handle as this may damage the lens.

  • Page 54: Connection Pin Assignments

    Connection Pin Assignments Analog Computer 1 and 2 Signal Input Ports: 15-pin mini D-sub female connector Computer Input Analog 1. Video input (red) 9. Not connected 2. Video input 10. GND (green/sync on green) 11. GND 3. Video input (blue) 12.

  • Page 55: Rs-232C Port Specifications

    RS-232C Port Specifications PC control A computer can be used to control the projector by connecting an RS-232C cable (null modem, cross type, sold separately) to the projector. (See page 14 for connection.) Communication conditions Set the serial port settings of the computer to match that of the table. Signal format: Conforms to RS-232C standard.
  • Page 56 NTSC 4.43 COLOR TEMPERATURE ( 3 – NTSC 3.58 CONTRAST ( 30 – VIDEO DISPLAY CONFIRMATION BRIGHT ( 30 – RED ( 30 – SHARP INPUT 2 IMAGE BLUE ( 30 – CUSTOM BACKGROUND ADJUSTMENT SELECTION COLOR ( 30 –...

  • Page 57: Computer Compatibility Chart

    Computer Compatibility Chart Horizontal Frequency: 15–126 kHz Vertical Frequency: 43–200 Hz Pixel Clock: 12–230 MHz* Compatible with sync on green and composite sync signals UXGA (1,600 1,200) compatible in advanced intelligent compression AICS (Advanced Intelligent Compression and Expansion System) resizing technology Horizontal Vertical Horizontal...

  • Page 58: Specifications

    (TINS-7046CEZZ), LCD projector quick references (TINS-7048CEZZ, TINS-7152CEZZ, TINS-7153CEZZ), Sharp Advanced Presentation Software operation manual (TINS- 7047CEZZ) This SHARP projector uses LCD (Liquid Crystal Display) panels. These This unit has some inactive TFTs within acceptable tolerances which very sophisticated panels contain 786,432 pixels ( RGB) TFTs (Thin may result in illuminated or inactive dots on the picture screen.

  • Page 59: Dimensions

    Dimensions Rear View Top View 97.5 96.5 Side View 243.5 10.5 Front View Bottom View Units: mm...

  • Page 60: Guide To Effective Presentations

    Guide to Effective Presentations Electronic presentations are one of the most effective tools presenters can use to persuade an audience. There are several ways to enhance your presentation and maximise your effectiveness. The following are guidelines to help you create and deliver a dynamic presentation.
  • Page 61 Guide to Effective Presentations • Background colours can subconsciously affect the audience: Red—increases viewers’ pulse and breathing and encourages risk taking but can also be associated with financial loss. Blue—has a calming and conservative affect on the Blue audience but can also create boredom among corporate audiences that are often inundated with this background colour.
  • Page 62 By manipulating the placement and use of the following tools, you will improve the impact of your presentation. Presentation from SHARP Lighting—Good lighting is an important component of a successful presentation. You should strive to create an unequal distribution of light.
  • Page 63 Guide to Effective Presentations d. Rehearsing & Delivery • The best time to rehearse is the day or evening before, not a couple of hours before, and the best place to rehearse is in the actual room. Rehearsing a speech in a small office is not the same as standing up in front of 100 people in a hotel ballroom or classroom.

  • Page 64: Freeze Function

    Glossary Anti-aliasing digital keystone correction Function to digitally correct a distorted image when the projector is set up at an angle. Aspect ratio Width and height ratio of an image. The normal aspect ratio of a computer and video image is 4 : 3. There are also wide images with an aspect ratio of 16 : 9 and 21 : 9.

  • Page 65: Index

    Index AC socket ................. 11 MENU button ..............23 ADJUSTMENT buttons ............. 23 MOUSE/ADJUSTMENT switch ......... 21 Air filter ................46 MOUSE buttons ............... 22 Anti-aliasing digital keystone correction ......MUTE button ..............17 Aspect ratio ..............36 Audio adjustments ............28 On-screen display language ...........

  • Page 66: Sharp Corporation

    SHARP CORPORATION...

Table of Contents