Computer Image Adjustments (Input 1 Mode Only); Auto Sync Adjustment - Sharp Notevision PG-C20XA Operation Manual

Computer Image Adjustments (INPUT 1 mode only)

Projector
ON/OFF
LAMP
POWER
TEMP.
KEYSTONE
INPUT AUTO SYNC
BACK ENTER MENU
On-screen Display
Remote control
1
Auto Sync Adjustment
• Used to automatically adjust a computer image.
• Auto Sync adjustment can be made manually by
pressing AUTO SYNC.
• The sync adjustment is automatically made each time the
projector is turned on while connected to a computer or
the input selection is changed.
1 Press AUTO SYNC.
During Auto Sync adjustment, "Adjusting The Image"
is displayed as shown on the left.
• Auto Sync adjustment may take some time to complete,
depending on the image of the computer connected to the
projector.
• When the optimum image cannot be achieved with Auto
Sync adjustment, use manual adjustments. (See page 29.)
28