Table of Contents
Advertisement
Adjusting the Projected Image
("SCR - ADJ" Menu)
1 Setting the Resize Mode
1
1
1
1
• For details of the Resize mode, see pages
30
and 31.
• You can also press RESIZE on the remote con-
trol to set the resize mode. (See page 30.)
2 Adjusting the Image
2
2
2
2
Position
You can move the projected image vertically.
O button
• This function only works in some RESIZE
30
modes. (See pages
Q button
and 31.)
Menu operation n Page
3 Keystone Correction
3
3
3
3
When the image is projected either from the top
or from the bottom towards the screen at an angle,
the image becomes distorted trapezoidally. The
function for correcting trapezoidal distortion is
called Keystone Correction.
Select "Keystone" on the "SCR-ADJ"
menu and adjust with the slide bar.
See page
28
for details of Keystone Correction.
Q button
• The Keystone Correction can be adjusted up
to an angle of approximately ± 40 (XR-
H825XA/XR-M825XA)/± 20 (XR-H825SA) de-
grees (when "Resize" is set to "Normal").
• You can also press KEYSTONE on the remote
control or on the projector to adjust Keystone
Correction.
4 Setting the On-screen
4
4
4
4
Display
Selectable
items
On
All on-screen displays are displayed.
Off
INPUT/VOLUME/AV MUTE/FREEZE/
AUTO SYNC/RESIZE/PICTURE MODE/
ECO+QUIET/MAGNIFY/ "An invalid
button has been pressed." are not
displayed.
38
O button
Description
43
Advertisement
Table of Contents
Troubleshooting
