Electronic Journal Report - Sharp XE-A203 - Cash Register Thermal Printing Graphic Logo Creation Programming Manual

ELECTRONIC JOURNAL REPORT

This job is own to print and clear EJ memory in X1/Z1 mode and OPXZ mode.
[Key sequence]
1) Reading and resetting of all records :
[OPXZ, X1/Z1 mode]
(Reading)
TL/NS
700
(Reseting)
2) Reading of the latest 10 records :
[OPXZ, X1/Z1 mode]
710
[ACTION]
It prints all or parts of printing data in EJ memory.
The printing format is same as each operation.
It is able to print and clear the EJ memory at general Z1 report by PGM
mode programming.
In that case, the contents of EJ memory is printed just after issued gen-
eral Z1 report.
(Issuing general Z1 report 3 Clear daily DEPT & TRANS memory 3
Issuing EJ memory 3 Clear EJ memory)
[Report cancel function]
It can be cancelled by turned the mode switch to MGR position while EJ
data is printed. (In this case, the contents of EJ memory are not cleared.)
XE-A203/A213 OP X/Z, X1/Z1, X2/Z2 MODE
3 – 5