Initialization Of The Setting Data - JUKI SC-810 Instruction Manual

8. Initialization of the setting data

6
2
(Caution) 1. When this operation is performed, the neutral compensation value of the pedal sensor be-
comes "0". Accordingly, be sure to execute the operation of automatic pedal sensor neutral
compensation before using the sewing machine. (Refer to page 25.)
2. Even when this operation is performed, the sewing data set by the operation panel cannot be
initialized.
3 4
– 26 –
All contents of function setting of SC-300 can be re-
turned to the standard set values.
) Pressng all swtches 2 , 3 and 4 , turn ON the
power swtch.
2) LED dsplays ndcaton 6 wth the sound "peep",
and ntalzaton starts.
3) The buzzer sounds after approxmately one sec-
ond (sngle sound three tmes, "peep", "peep",
and "peep"), and the settng data returns to the
standard settng value.
(Caution) Do not turn OFF the power on the way
of initializing operation. Program of the
main unit may be broken.
4) Turn OFF the power switch, and turn ON the
power swtch agan to return to the normal mode.