JUKI SC-810 Instruction Manual page 21

Specified No.
1 2
1 2
1 2
* Smultaneously press
the ntal value.
5
3 4
5
3 4
swtch 3 and swtch 4 , and the setting contents of set No. will return to
– 5 –
4) When you want to advance the setting No., press
/ swtch 2 to advance the setting No.
When you want to return the setting No., press
/ swtch 1 to return the setting No.
(Caution) When
/
2 ) is held pressing, the setting No. will re-
turn (will advance) continuously.
When the setting No. is advanced (re-
turned), the contents which are before by
one (after by one) will be determined. So,
be careful when changing the contents (
up/down switch is touched).
EXAMPLE) CHANGING THE FLICKER REDUC-
ING FUNCTION (SETTING No. 5)
Press / swtch 2 several tmes to adjust set
No. to "5". Press switch 5 three tmes to change the
set No. to "3" since the current set value is displayed
on LED 4 . (Standard : "0")
(Caution) Keep pressing
switch 3 , and the setting value can be
changed continuously.
5) When the change has been completed, press
/ swtch 1 or
specfy the changed value.
(Caution) 1. When turning OFF the power before
performing this work, the contents
which have been changed are not up-
dated.
2. Press
/
display will change to the contents of
the setting No. which is before by one.
3. Press
/
display will change to the contents of
next setting No. After completing the
operation, turn OFF the power and turn
ON the power again to return to the
normal operation.
After completng the operaton, turn OFF the power
and turn ON the power again to return to the normal
operaton.
switch 1 ( switch
/
switch 4 or
/ swtch 2 to
switch 1 , and screen
switch 2 , and screen