JUKI SC-810 Instruction Manual page 10

2
1
1
2
3
[ Connection of the connector for CP panel ]
Connector for connecting CP-160/170 is prepared.
Payng attenton to the orentaton of the connector
1 , connect t to connector 2 (CN38) located on the
crcut board. After connectng, securely lock the con-
nector.
(Caution)
[ Connection of the pedal of standing-work machine ]
Connect the connector of PK70 1 to connector 2
(CN39 : 12P) of SC-810.
(Caution)
7) After inserting the connector, put all cords togeth-
er wth cable clp band !1 located on the sde of
!1
the box.
8) Close connector cover 3 .
(Caution)
– 4 –
Be sure to turn OFF the power before con-
necting the connector.
Be sure to turn OFF the power before con-
necting the connector.
Take care not to allow the cord to be
caught in connector cover 3 .