Explanation Of The Operation Panel - JUKI SC-810 Instruction Manual

2. Explanation of the operation panel

5
A
1 / swtch
/ swtch
2
3 switch
switch
4
5 PATTERN SELECTION display :
6 REVERSE STITCHING
AT START dsplay
7 REVERSE STITCHING
AT END display
8 NUMBER OF STITCHES display :
9 AUTOMATIC
THREAD TRIMMING display
!0 THREAD TRIMMING
PROHIBITION display
!1 ONE-SHOT AUTOMATIC
STITCHING display
6
B
1 2
: Used for determnng the contents of settng.
When this switch is pressed, flashing stops and the contents of
settng are determned.
: Used for changng the contents of settng.
When this switch is pressed, changeable positions flash on and off.
By pressing the switch, flashing position shifts in the right direction.
: Used for changing the contents of the selected display (flashing
secton). When ths swtch s pressed, the contents of the dsplay
ncrease.
: Used for changing the contents of the selected display (flashing
secton).
When ths swtch s pressed, the contents of the dsplay decrease.
The selected LED lamp lights up in case of A reverse sttchng
LED and B overlapped sttchng.
: Rendered effective when reverse stitching pattern is selected.
" Wthout reverse sttchng dsplay / " " Reverse sttchng dsplay /
"
" Double reverse sttchng dsplay
"
: Rendered effective when reverse stitching pattern is selected.
" Wthout reverse sttchng dsplay / " " Reverse sttchng dsplay /
"
" Double reverse sttchng dsplay
"
Number of stitches of reverse stitching or overlapped stitching is
dsplayed.
: Lights up when the automatic thread trimming by depressing the
front part of the pedal is selected.
(Lghts up when the overlapped sttchng s selected.)
: Lights up when the thread trimming prohibition is selected.
Function setting No. 9
: Lights up when the one-shot automatic stitching is selected.
(Lights up when the overlapped stitching is selected.)
7
8
3 4
– 0 –
!1
9 !0