Attaching The Connecting Rod; Connecting The Cords - JUKI SC-810 Instruction Manual

3. Attaching the connecting rod

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and a lapse of 5 minutes or more.
2
3

4. Connecting the cords

WARNING :
• To prevent personal injury caused by abrupt start of the sewing machine, carry out the work after
turning OFF the power switch and a lapse of 5 minutes or more.
• To prevent damage of device caused by maloperation and wrong specifications, be sure to connect
all the corresponding connectors to the specified places.
• To prevent personal injury caused by maloperation, be sure to lock the connector with lock.
• As for the details of handling respective devices, read carefully the Instruction Manuals supplied
with the devices before handling the devices.
Followng connectors are prepared when loosenng the connector cover 1 fixing screws A of SC-810 and
opening the cover. Connect the machine head connectors to the positions corresponding to each other so as
to fit the devices mounted on the machine head.
A
A
B
1
1
A
) Fx connectng rod 1 to nstallng hole B of ped-
al lever 2 wth nut 3 .
2) Installng connectng rod 1 to nstallng hole A
wll lengthen the pedal depressng stroke, and
the pedal operaton at a medum speed wll be
easer.
Motor signal connector
1 CN30
Machine head solenoid connector
2 CN36
Presser foot lifter solenoid connector
3 CN37
Safety switch
4 CN56
5 CN38 CP panel connector
6 CN55 CN55 +24V power
7 CN50 Output connector for optional
7
6
5
Unused connector
– 2 –
1 2
3
4