Signal Type Setting; Adjusting The Color Space; Adjusting The Dynamic Range; Selecting The Background Image - Sharp XV-Z21000 Operation Manual

Using the "Options" Menu (Continued)

8 Signal Type Setting

When using an input mode other than S-VIDEO or VIDEO
input, set the signal type setting to the corresponding
input signal type (RBG or Component).
■ When COMPONENT is selected for the
input mode
Selectable items
Auto Automatically selects the appropri-
ate input signal between RGB and
Component.
RGB Set when RGB signals are received.
Component Set when component signals are
received.
■ When DVI is selected for the input mode
Selectable items
D. PC RGB Set when digital PC RGB signals are
received from the computer.
D. PC COMP. Set when digital PC component signals
are received from the computer.
D. VIDEO RGB Set when digital video RGB signals are
received from video equipment.
D. VIDEO COMP. Set when digital video component
signals are received from video equip-
ment.
A. RGB Set when analog RGB signals are
received.
A. COMP. Set when analog component signals
are received.
■ When HDMI is selected for the input mode
This function sets the type of picture signal input from
HDMI-compatible equipment.
Selectable items
Auto Ordinarily, the Auto setting should be
used.
RGB Displays images in RGB (Red/Green/
Blue) mode.
YCbCr4:4:4 These modes display images using a
luminance signal (Y) to indicate contrast
YCbCr4:2:2
and color difference signals (CbCr) to
show the colors. (Select whichever
mode gives the best image.)
Note
• You can also select "Signal Type" using
RGB/COMP. on the remote control.
-44
Description
Description
Description

9 Adjusting the Color Space

This function sets the color space for signals input from
an HDMI-compatible device.
Selectable items
Auto In most circumstances, "Auto" should
be selected.
ITU601 Select the item that results in the best
picture quality.
ITU709

0 Adjusting the Dynamic Range

An optimum picture may not be displayed if an HDMI-
capable device's output signal type and the projector's
input signal type do not match. If this should occur,
switch "Dynamic Range".
Selectable items
Auto In most circumstances, "Auto" should
be selected.
Standard When the black levels of the image show
banding or appear faded, select the item
Enhanced
that results in the best picture quality.
q Selecting the Background Image
Selectable items
Logo SHARP logo screen
Blue Blue screen
None — (Black screen)
w Adjusting the Economy Mode
Setting the Economy mode:
1 Select "Economy Mode" and press |.
2 Press '/" to select the desired item and press
ENTER.
■ RS-232C Port
When the RS-232C port is set to "ON", the RS-232C
function operates and consumes power even when the
projector is in Standby mode. Accordingly, the RS-232C
port should be set to "OFF" when it is not being used
so as to minimize the amount of power consumed when
the projector is in Standby mode.
Selectable items
ON The RS-232C is operating at all times
(to accept communications).
OFF RS-232C does not operate when the
power supply is in standby.
Note
• When you control the projector by means of RS-
232C, select "ON".
Menu operation ⇒ Page 34
Description
Description
Description
Description