Adjusting The Volume; Displaying The Black Screen And Turning Off The Sound Temporarily - Sharp XV-Z100 User Manual

Hide thumbs Also See for XV-Z100:

Table of Contents

Image Projection (Continued)

Adjusting the Volume

Press K/L on the remote control or

–O/Q+ on the projector to adjust the vol-

ume.

Note

• Pressing K/–O will lower the volume.

• Pressing L/Q+ will raise the volume.

• When the projector is connected to external

equipment, the volume level of the external

equipment changes in accordance with the

volume level of the projector. Set the projector's

volume to the lowest level when turning the

projector on/off or changing the input signal.

• When you do not want to output the sound from

the projector's speaker while the projector is

connected to external equipment, set

"Speaker" in "PRJ-ADJ" menu to "Off". (See

page 45.)

Displaying the Black Screen

and Turning off the Sound

Temporarily

Press MAV MUTE on the remote con-

trol to temporarily display a black

screen and turn off the sound.

Note

• Pressing MAV MUTE again will turn the projected

image back on.

Downloaded from ProjectorsManual.com Manuals

On-screen Display

AV MUTE button

Volume buttons

Table of Contents