Pausing Or Restarting; Changing Cycles, Options And Modifiers; Status Lights - Kenmore Elite HE3t Owner's Manual & Installation Instructions

NOTE: The separator will be in the liquid (front) position when
shipped from the factory.
Bleach comparb'nent
(Number 5 in Dispenser Illustration)
Add NO MORE THAN 1/3 cup liquid chlorine bleach to this
compartment. The bleach will be automatically diluted and
dispensed at the proper time during the wash cycle, This
compartment cannot dilute powdered bleach.
• Always measure liquid chlorine bleach. Use a measuring cup
with a pour spout; do not guess.
• Do not fill beyond the "MAX" level. Overfilling could cause
severe garment damage.
Fabric Softener comparb'nent
(Number 6 in Dispenser illustration)
Add 1/4cup liquid fabric softener to this compartment. Fabric
softener will be automatically dispensed in the final rinse.
• Do not fill beyond the "MAX" level.
Pausing or Restarting
1. To pause the washer at any time, select PAUSE/CANCEL
2. To continue the cycle, select and hold START (for
apl_roximately I second).
ChangingOyctes, Options and
Modifiers
Cycles, Options and Modifiers can be changed anytime before
START is selected.
Options and Modifiers can be changed anytime after START is
selected and before the start of the selected Option or Modifier.
To cancel a cycle and select a new cycle
1. Select PAUSE/CANCEL twice,
2. Select desired cycle.
3. Select the desired OPTIONS.
4. Select and hold START (for approximately I second) to restart
the washer at the beginning of the new cycle.
To cancel a cycle
1. Select PAUSE/CANCEL twice.
2. The washer powers down, the door unlocks, and clothes can
be removed.
To change Options or Modifiers after the cycle has started
1. Select PAUSE/CANCEL
2. Select the desired OPTIONS or MODIFIERS.
3. Select and hold START (for approximately 1 second) to
continue the cycle,
NOTE: If the water level or the temperature is too high, the
washer will drain automatically before the door unlocks.
To drain the washer manually
1. Select PAUSE/CANCEL.
2. Select DRAIN/SPIN.
3. Select and hold START (for approximately 1 second) to begin
the drain.
4. When the spin is complete, the door unlocks. Items can be
removed from the washer.
$ atusLigh ,
These lights s how which portion ofthecyclethewasher is
operating. T hey alsoindicate w hen you can add an additional
itemto thewash cycleand when the controls a relocked.
STATUS
ADDA GARMENT •
SOAK ]PREWASH
•
WASH €
RINSE •
SPIN •
CLOTHES CLEAN •
CONTROL LOCKED •
Adding items
You can add items to the washer after the cycle has started if the
ADD A GARMENT status light is glowing.
To add items
1. Select PAUSE/CANCEL The washer door unlocks, and items
can be added.
2. To continue the cycle, close the door and select and hold
START (for approximately I second).
Locking contzols
The Control Lock prevents unintended use of the washer. You
can also use the control lock feature to prevent unintended cycle
or option changes during a cycle, When CONTROL LOCKED is
lit, all buttons are disabled. You can lock the washer while it is
operating.
To lock the controls
Select and hold DRAIN/SPIN for 3 seconds.
DRAIN / SPIN
PRESS & HOLD 3
SECONDS TO LOCK I
UNLOCK CONTROL
The CONTROL LOCKED status light glows.
To unlock the controls
Select and hold DRAIN/SPIN for 3 seconds until the CONTROL
LOCKED Status light turns off.
IB
!
13