Replacing Consumables; Inserting The Battery - Epson EMP-74 User Manual

Maintenance

Replacing Consumables

This section describes how to replace the remote control battery, the lamp
and the air filter.

Inserting the Battery

Use the following type of battery as a replacement.
1 CR2025 lithium battery
CAUTION
Be sure to read the Safety Instructions/World-Wide Warranty Terms
before handling the battery.
PROCEDURE
Remove the battery holder.
1
While pushing the catch of the battery holder inwards, pull the
battery holder out.
Catch
Remove the old battery and insert the new battery.
2
Check the position of the (+) mark inside the battery holder to
ensure that the battery is inserted the correct way.
Old battery
Insert the battery holder into the remote control.
3
Push the battery holder in until it clicks.
TIP
Dispose of used batteries in accordance with local waste disposal
regulations.
New battery
mark
84