Deleting A Package; Starting A Package - HP StorageWorks 8000 - NAS User Manual

Deleting a Package

Starting a Package

88 Managing Your Storage
Note This section applies only if you have purchased a high-
availability NAS solution.
Before you proceed, you must stop the package to edit the information.
Deleting a package does not delete the volumes and shares/exports within
the package. However, once the package is deleted, the volumes within the
deleted package will not be accessible to client systems until you add them to
another package.
To delete a package:
1 In the Command View NAS web interface, click the Storage tab.
2 Navigate down the tree and select Failover Packages.
3 Select the package you want to delete by clicking the row.
4 Select Actions > Delete Package.
Note This section applies only if you have purchased a high-
availability NAS solution.
This operation runs the specified package on the designated server. Once the
package is up, the volumes in the package are mounted and the shares and
exports associated with each volume are accessible to client systems. Execute
Start Package after you create a package or when you want to restart a
package that has been stopped.
To start a package:
1 In the Command View NAS web interface, click the Storage tab.
2 Navigate down the tree and select Failover Packages.
3 Select the package you want to start by clicking the row.
4 Select Actions > Start Package.
5 Select the Node where you want the package to start from the drop-down
list.
6 Click OK.