Command View Nas Command Line Interface - HP StorageWorks 8000 - NAS User Manual

Command View NAS
Command Line Interface
In addition to the Command View NAS web interface, the HP NAS 8000 also
includes a text command interface that allows you to manually enter
commands or to run batch commands using either a serial connection or
telnet.
The following sections describe the basic functionality of the Command View
NAS Command Line Interface. For detailed information on the syntax and
parameters for each text command, see the
Command Reference on the HP NAS 8000 documentation CD or at the HP
( http://www.hp.com/support/nas8000).
support web site
Logging In
You can log in to the NAS server using a serial connection or telnet.
1 Connect to the system:
To connect using a serial connection, use a terminal emulator with the
I
following settings:
— Bits per second: 9600
— Data bits: 8
— Parity: None
— Stop bits: 1
— Flow control: None
To connect using telnet, enter the following command on a remote
I
computer:
— telnet xxx.xxx.xxx.xxx
where xxx.xxx.xxx.xxx is the IP address of the HP NAS 8000 system.
HP Surestore NAS 8000

Command View NAS Command Line Interface 221

E