Using Veritas NetBackup
NetBackup for Windows
NetBackup is a network based, backup and recovery tool (NetBackup is a
product of Veritas Software Corporation).
You can use NetBackup on either a Windows NT or UNIX system connected
to your NAS server.
Note
When you back up with a remote server, you cannot use a tape
device local to the NAS server.
1
Select Start > Programs > Veritas NetBackup > NetBackup Admin.
2
Select Backup, Archive, & Restore.
3
Click Select for Backup.
4
Expand the network and find the NAS server. Expand the volumes. You
can only back up Windows shared volumes.
5
Select a volume and click Backup > Start Backup of Marked Files.
6
Select your backup options as you normally would, then start the backup.
Integrating with Network Backup Applications 169