Using Real Time Protection Control; Understanding Real Time Protection Control; Creating And Editing An Rtp Task - HP StorageWorks 8000 - NAS User Manual

Using Real Time Protection Control

Understanding Real Time Protection Control

Real Time Protection (RTP) scans each file in the selected volume immediately
after the volume is written to the storage system, thereby protecting the NAS
server from viruses that could spread across the network. RTP can hinder your
device's performance, depending on the amount of files that are changed on
the protected volume.
From the HP Virus Guard web interface, select Real Time Protection Control.
A table displays the following drive information for every scan:
RTP task name
I
Actions for the scan
I
Volumes to be scanned
I
You can click on a column heading to sort items in that column.
The real time protection screen lets you:
Create a new RTP task
I
Edit an RTP task
I
Change your RTP global settings
I
Delete an RTP task
I

Creating and Editing an RTP Task

To create a new RTP task:
1 In the HP Virus Guard web interface, select Real Time Protection.
2 Select Actions > Create New RTP Task.
3 Enter a name for the real time protection task.
4 In the Detection tab, select the volumes to be scanned from the Available
Volumes list, then click Add.
Click the Actions tab and select what action you want the software to take
5
when a virus is found:
— Log only
— Quarantine
— Rename
Enabling Virus and Backup Software 135