Task Overview; Prerequisites; Management Tasks - HP StorageWorks 8000 - NAS User Manual

Task Overview

Prerequisites

Management Tasks

40 Getting Started
During setup, your NAS 8000 was installed and configured by an HP storage
specialist who performed these tasks:
1 Planned your network and storage settings. . . . You should have done this
with your HP installation specialist prior to receiving the product. See your
HP Surestore NAS 8000 Solution Integration Manual (SIM) Binder for
Network and Storage Planning Guide and "Understanding Physical
your
and Logical Storage" on page 21 in this user's guide for more
information.
2 Installed the NAS 8000 hardware. . . . For information, see the
NAS 8000 Installation Guide in your SIM Binder.
Configured your system and network. . . . For information, see the
3
Surestore NAS 8000 Installation Guide in your SIM Binder and
Configuring Your System and Network on page 43.
4 Set up storage. . . . For information, see the
Installation Guide in your SIM Binder and Managing Your Storage on
page 77.
After the prerequisite tasks are done, you are ready to perform other storage
management tasks such as:
Configure additional system and network settings (see Chapter 4,
I
Configuring Your System and Network). You can change these when
something about your system changes (location, system administrator,
new user or group mappings). See .
Manage your storage (see Chapter 5, Managing Your Storage). Most
I
storage settings were properly set during setup. You will need to change
them if you change your storage configuration or if you choose options
such as renaming/adding arrays or working with snapshots. Make sure
you understand storage concepts before proceeding. See "Understanding
Physical and Logical Storage" on page 21 for more information.
HP Surestore
HP Surestore NAS 8000
HP