2
Follow the instructions that come with your NIC upgrade kit to install the
new card(s) into the reserved PCI slots 3 and 4 that have been allocated
for NIC expansion.
Figure 1
NAS Server Rear View
Note
You may install any supported NIC into slots 3 or 4 in any
order; however, the HP NAS 8000 operating system will assign
ports in the order the drivers are loaded, not in the order the
hardware is initialized.
3
Power up the system in this sequence:
—
UPS
—
Library
—
FC switch (for high-availability configurations)
—
Array
—
Quorum server (for high-availability configurations)
—
NAS server(s)
NAS 8000 System and Hardware Upgrades 185