If you have DHCP enabled, NIC configuration occurs automatically.
Depending on your configuration, the DHCP server provides any or all of the
following parameters: IP Address, Subnet Mask, Gateway Address,
Broadcast Address, and DNS Domain Name.
To edit the IP configuration for a NIC port:
1
In the Command View NAS web interface, click the Configuration tab.
2
Navigate down the tree to TCP/IP > IP Addresses. A table lists:
NIC Ports and Bond Channels
—
—
Address configuration (whether it is manual, DHCP or bonded to a
bond channel)
—
IP Address
—
Gateway Address
—
Subnet Mask
—
Broadcast Address
—
Management Port
—
MAC Address
Card speed
—
3
Select the Port you want to edit then select Actions > Edit Selected IP
Configuration.
4
Select an address configuration (manual or DHCP) from the drop-down
list. For a manual configuration, enter the IP Address, Gateway Address,
Subnet Mask, and Broadcast Address.
5
Click OK.
Configuring Your System and Network
55