Configuring System Security
Editing the Command View NAS Access List
Setting an Administrative Password
The Command View NAS access list allows you to define the machines that
may access the Command View NAS web interface. If a specific machine's
hostname or IP address is not listed, that machine cannot access the
Command View NAS.
To set up the Command View NAS access list:
1
In the Command View NAS web interface, click the Configuration tab.
Navigate down the tree to System Security.
2
3
Select Actions > Edit GUI Access List.
4
Enter the IP address or hostname, then click the add-item icon or press
Enter.
You can set a password for the NAS server. This prevents unauthorized
access to the Command View NAS web interface. The NAS server ships
without password protection, and the fields are initially blank.
Note
If you set a password for the NAS server, protect it as you
would any other password. If you forget or lose this password,
you will not be able to access your device. Call HP Support for
assistance.
If you specify a password, you must know the password to view or modify the
information in the other tabs. You can not access the Command View NAS
web interface without the password.
To assign, change, or remove an administrative password:
1
In the Command View NAS web interface, click the Configuration tab.
2
Navigate down the tree to System Security.
3
Select Actions > Edit Admin Password.
Configuring Your System and Network
49