Installing Plates To Projector - PEERLESS ELPMBPRG Installation And Assembly Manual

Installing Plates to Projector

• All spacers shall be used where indicated. Not using spacers can cause damage to projector.
• It is the responsibility of the installer to ensure that the projector is properly ventilated.
NOTE: For all PowerLite
exceed 50 lbs.
Adapter Plate: PowerLite 1830, 1915, 1925W,
410W, 83V+, 83+, 84+, 85+, 825+, 826W+
Use adapter plate (B) as shown. Continue to step 3.
2
B
Visit the Peerless Web Site at www.peerlessmounts.com
models, the manufacturer's product weight must be reviewed to ensure that the weight does not
®
CAUTION
2-Plate Horizontal Configuration: PowerLite Pro
G5200WNL, G5350NL, G5150NL, G5000, 6110i
Attach adapter plate (B) to dedicated adapter plate
2
(C) using six M4 x 6 mm socket pin screws (G).
7 of 12
For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.
B
ISSUED: 04-01-08 SHEET #: 055-9254-7 04-21-10
G
C