PEERLESS ELPMBPRG Installation And Assembly Manual page 8

Advanced projector ceiling mount with precision gear

Hide thumbs Also See for ELPMBPRG:

Table of Contents

NOTE: Shoulder indicates back of adapter plate (B)

Flip projector upside down. Find your projector model from the hole patterns listed below. Using the holes indicated

on the corresponding hole pattern diagram, attach adapter plate (B) to projector using the appropriate number of

M4 x 20 mm socket pin serrated washer head screws (D) and spacers (F).

NOTE: Retaining spacers go between adapter plate and projector.

Hole Patterns

A. PowerLite 83V+, 83+, 84+, 85+,

410W, 825+, 826W+, 1830, 1915,

1925W

FRONT

Visit the Peerless Web Site at www.peerlessmounts.com

B. PowerLite 6110i

NOTE: SHOULDER

INDICATES THE BACK OF

ADAPTER PLATE (B)

FRONT

8 of 12

For Technical Support Contact Peerless Mounts at 1-800-729-0307 or 708-865-8870.

C. PowerLite Pro G5350NL,

G5200WNL, G5150NL, G5000

FRONT

ISSUED: 04-01-08 SHEET #: 055-9254-7 04-21-10

Table of Contents