Troubleshooting - Epson EASYMP EMP-1705 Operation Manual

Troubleshooting

If any of the following problems occur, refer to the pages given for
each problem.
Problems concerning EasyMP
Suddenly changes to the EasyMP screen
f
f When a connection is made using EMP NS Connection, the
projected image remains as is, and a connection cannot be
made from another computer.
The projector is not found when EMP NS Connection is
f
started s p.79
f Cannot connect in "Advanced Connection Mode" or wired
LAN connection
s
The Slideshow cannot be displayed on the desired display
f
when the multi-screen display function is being executed.
s p.80
f Applications are no longer displayed from the computer's
screen when the multi-screen display function is executed.
s p.80
The mouse cursor is not displayed on the computer's
f
screen. p.80
s
f The image and sound for movies with EMP NS Connection
are not displayed, the image is slow to appear, or either the
video or audio stop
s
When a connection is made using EMP NS Connection, a
f
PowerPoint Slideshow cannot be started
f When a connection has been made using EMP NS
Connection, the screen will not be refreshed when using an
Office application. s
f Cannot specify files with EMP SlideMaker2
f Error message when starting up EMP NS Connection
f Error message when starting up EMP SlideMaker2
p.78
s
p.78
s
p.80
p.81
s p.81
p.81
s p.81
s
Problems concerning watch and control by EMP
Monitor
f Mail is not sent even if an
abnormality occurs in the
projector
f Cannot control or monitor the
projector with EMP Monitor
s p.84
Error message when starting up EMP Monitor
f
s p.82
p.83
s p.83
77
p.84
s