Management Using Snmp - Epson EASYMP EMP-1705 Operation Manual

Management Using SNMP

By setting SNMP in the EasyMP network setting, notification
messages will be sent to preset e-mail addresses when a problem or
warning occurs with a projector. This is useful when controlling
projectors centrally at a point distant from them.
• SNMP should be managed by a network administrator or
q
someone who is familiar with the network.
• The SNMP function to monitor the projector requires
SNMP Manager to be installed on the computer.
• The managing function using SNMP cannot be used via a
wireless LAN in the "Quick Connection Mode".
• Up to two destination IP addresses can be saved.
To set SNMP, select "SNMP" from network settings on the projector's
configuration menu.s User's Guide "Network Menu (EMP-1715/1705
Only)" "SNMP Menu"
40