Cases Like These; Checking The Projection Scenario Status From A Computer - Epson EASYMP EMP-1705 Operation Manual

Cases Like These

Checking the Projection Scenario Status from a
Computer
You can check on a computer how a created scenario is played back on a
projector by using PC Free. All of the structural elements of the scenario
such as images, animation, BGM, can be played.
Procedure
A
Open the scenario you want to check in EMP
SlideMaker2.
B
Select "Scenario Options" - "Scenario Preview".
The "Scenario Preview" screen is displayed.
Stop Pause Play
Status bar
Volume
Rewind Fast-forward
The following table shows the functions of each button.
Stop
Stops playback and returns to the first slide.
Pause Pauses the slides when "Automatically after" is
selected for "Advance". s
Play Starts the scenario preview. Also, this restarts
stopped or paused scenarios. The following slide is
displayed when "On mouse click" is set for
"Advance". s
Rewind Returns to the previous slide or returns to the screen
previous to the animation performance. The
animation effects are not performed upon return.
Fast-
Proceeds to the next slide or shows the screen after
forward
animation performance. At this time the animation
effects are not performed.
Volume Performs volume control. Adjusts the volume of
BGM.
Status bar Displays the progress of the scenario on a bar. At
first there is no bar display, and then the bar extends
from left to right as the scenario progresses. The
scenario ends at the right hand side of the bar.
C
After you finish checking, click the " " button at the
top right of the window to close the scenario
preview screen.
72
p.74
p.74