Power Management Setup Menu - Zotac nForce 630i - ITX User Manual

Power Management Setup Menu

Select Power Management Setup from the CMOS Setup Utility menu and press
Enter to display the Power Management Setup menu.
q ACPI Function
This function on the Power Management Setup menu allows you to enable or
disable the ACPI function.
q Power Management
Use this option to set the mode for Power Management
q Video Off Method
Use this option to set a Method for Video off.
q HDD Power Down
Use this option to enable or disable a mode of HDD Power down.
q Soft-Off by PBNT
This function on the Power Management Setup menu allows you to set Soft-Off by
PBNT to [Instant-Off] or [Delay 4 Sec].
q PowerOn after PWR-fail
Use this option to change its setting
q Power-On by Alarm
Determines whether to power on the system at a desired time. If enable set the
date and time as following:
v Date(of Month) Alarm: Turn on the system at a specific time on each day or
on a specific day in a month.
v Time(hh:mm:ss) Alarm: Set the time at which the system will be Powered on
automatically.
q PowerOn Function
Use this option to Power On Mode(by button only,keyboard 98,mouse left/right,hot
key, password or any key. )
q HPET Support
Use this option to enable or disable HPET Support; if enable, HPET Mode display.
We can select.
Configuring the BIOS