Load Fail-Safe Defaults; Load Optimized Defaults; Set Supervisor/User Password - Zotac nForce 630i - ITX User Manual

NForce 610i/630i-ITX series Motherboard

Load Fail-Safe Defaults

Press <Enter> on this item and then press the <Y> key to load the Fail-Safe BIOS
default settings.You can try to Load Fail-Safe Default when the system is unstable.

Load Optimized Defaults

Press <Enter> on this item and then press the <Y> key to load the optimal BIOS
default settings.The BIOS optimized defaults settings helps the system to operate in
optimum state.Always load the Optimized defaults after updating the BIOS or after
clearing the CMOS values.

Set Supervisor/User Password

Press <Enter> on the item "Set Supervisor Password" or "Set User Password" and type
the password with up to 8 characters and then press <Enter>. You will be requested to
confirm the password. Type the password again and press <Enter>.