Table of Contents
Advertisement
NForce 610i/630i-ITX series Motherboard
SATA RAID User Manual
Setting up the BIOS
1. Setting your computer, then press Delete
to enter the Bios setup. The BIOS
CMOS Setup Utility window appears.
2. Use the arrow keys to select Integrated
Peripherals, then press Enter. The
I n t e g r a t e d P e r i p h e r a l s w i n d o w
appears.
3. Use the arrow keys to select the RAID
Config,then press Enter.The RAID
Config window appears.
4. From the RAID Config window,enable
RAID, then enable the disks that you
want to use as RAID disks.
5. Press F10 to save the configuration and
exit. The PC reboo
6. Enter the RAID BIOS Setup by pressing
F10 when prompted, and proceed to
set up the NVRAID BIOS as described
in the next Section.
40
ts.
Advertisement
Table of Contents
